Configure the Storwize family and SVC driver - OpenStack Configuration Reference

Enable the Storwize family and SVC driver

Set the volume driver to the Storwize family and SVC driver by setting the volume_driver option in cinder.conf as follows:

volume_driver = cinder.volume.drivers.ibm.storwize_svc.StorwizeSVCDriver

Storwize family and SVC driver options in cinder.conf

The following options specify default values for all volumes. Some can be over-ridden using volume types, which are described below.

Table 1.13. List of configuration flags for Storwize storage and SVC driver
Flag name	Type	Default	Description
`san_ip`	Required		Management IP or host name
`san_ssh_port`	Optional	22	Management port
`san_login`	Required		Management login username
`san_password`	Required ^[a]		Management login password
`san_private_key`	Required ^[a]		Management login SSH private key
`storwize_svc_volpool_name`	Required		Default pool name for volumes
`storwize_svc_vol_rsize`	Optional	2	Initial physical allocation (percentage) ^[b]
`storwize_svc_vol_warning`	Optional	0 (disabled)	Space allocation warning threshold (percentage) ^[b]
`storwize_svc_vol_autoexpand`	Optional	True	Enable or disable volume auto expand ^[c]
`storwize_svc_vol_grainsize`	Optional	256	Volume grain size ^[b] in KB
`storwize_svc_vol_compression`	Optional	False	Enable or disable Real-time Compression ^[d]
`storwize_svc_vol_easytier`	Optional	True	Enable or disable Easy Tier ^[e]
`storwize_svc_vol_iogrp`	Optional	0	The I/O group in which to allocate vdisks
`storwize_svc_flashcopy_timeout`	Optional	120	FlashCopy timeout threshold ^[f] (seconds)
`storwize_svc_connection_protocol`	Optional	iSCSI	Connection protocol to use (currently supports 'iSCSI' or 'FC')
`storwize_svc_iscsi_chap_enabled`	Optional	True	Configure CHAP authentication for iSCSI connections
`storwize_svc_multipath_enabled`	Optional	False	Enable multipath for FC connections ^[g]
`storwize_svc_multihost_enabled`	Optional	True	Enable mapping vdisks to multiple hosts ^[h]
^[a]The authentication requires either a password (`san_password`) or SSH private key (`san_private_key`). One must be specified. If both are specified, the driver uses only the SSH private key. ^[b]The driver creates thin-provisioned volumes by default. The `storwize_svc_vol_rsize` flag defines the initial physical allocation percentage for thin-provisioned volumes, or if set to `-1`, the driver creates full allocated volumes. More details about the available options are available in the Storwize family and SVC documentation. ^[c]Defines whether thin-provisioned volumes can be auto expanded by the storage system, a value of `True` means that auto expansion is enabled, a value of `False` disables auto expansion. Details about this option can be found in the `–autoexpand` flag of the Storwize family and SVC command line interface `mkvdisk` command. ^[d]Defines whether Real-time Compression is used for the volumes created with OpenStack. Details on Real-time Compression can be found in the Storwize family and SVC documentation. The Storwize or SVC system must have compression enabled for this feature to work. ^[e]Defines whether Easy Tier is used for the volumes created with OpenStack. Details on EasyTier can be found in the Storwize family and SVC documentation. The Storwize or SVC system must have Easy Tier enabled for this feature to work. ^[f]The driver wait timeout threshold when creating an OpenStack snapshot. This is actually the maximum amount of time that the driver waits for the Storwize family or SVC system to prepare a new FlashCopy mapping. The driver accepts a maximum wait time of 600 seconds (10 minutes). ^[g]Multipath for iSCSI connections requires no storage-side configuration and is enabled if the compute host has multipath configured. ^[h]This option allows the driver to map a vdisk to more than one host at a time. This scenario occurs during migration of a virtual machine with an attached volume; the volume is simultaneously mapped to both the source and destination compute hosts. If your deployment does not require attaching vdisks to multiple hosts, setting this flag to False will provide added safety.

Table 1.14. Description of IBM Storwise driver configuration options
Configuration option = Default value	Description
[DEFAULT]
storwize_svc_allow_tenant_qos = False	(BoolOpt) Allow tenants to specify QOS on create
storwize_svc_connection_protocol = iSCSI	(StrOpt) Connection protocol (iSCSI/FC)
storwize_svc_flashcopy_timeout = 120	(IntOpt) Maximum number of seconds to wait for FlashCopy to be prepared. Maximum value is 600 seconds (10 minutes)
storwize_svc_iscsi_chap_enabled = True	(BoolOpt) Configure CHAP authentication for iSCSI connections (Default: Enabled)
storwize_svc_multihostmap_enabled = True	(BoolOpt) Allows vdisk to multi host mapping
storwize_svc_multipath_enabled = False	(BoolOpt) Connect with multipath (FC only; iSCSI multipath is controlled by Nova)
storwize_svc_npiv_compatibility_mode = False	(BoolOpt) Indicate whether svc driver is compatible for NPIV setup. If it is compatible, it will allow no wwpns being returned on get_conn_fc_wwpns during initialize_connection
storwize_svc_stretched_cluster_partner = None	(StrOpt) If operating in stretched cluster mode, specify the name of the pool in which mirrored copies are stored.Example: "pool2"
storwize_svc_vol_autoexpand = True	(BoolOpt) Storage system autoexpand parameter for volumes (True/False)
storwize_svc_vol_compression = False	(BoolOpt) Storage system compression option for volumes
storwize_svc_vol_easytier = True	(BoolOpt) Enable Easy Tier for volumes
storwize_svc_vol_grainsize = 256	(IntOpt) Storage system grain size parameter for volumes (32/64/128/256)
storwize_svc_vol_iogrp = 0	(IntOpt) The I/O group in which to allocate volumes
storwize_svc_vol_rsize = 2	(IntOpt) Storage system space-efficiency parameter for volumes (percentage)
storwize_svc_vol_warning = 0	(IntOpt) Storage system threshold for volume capacity warnings (percentage)
storwize_svc_volpool_name = volpool	(StrOpt) Storage system storage pool for volumes

Placement with volume types

The IBM Storwize/SVC driver exposes capabilities that can be added to the extra specs of volume types, and used by the filter scheduler to determine placement of new volumes. Make sure to prefix these keys with capabilities: to indicate that the scheduler should use them. The following extra specs are supported:

capabilities:volume_back-end_name - Specify a specific back-end where the volume should be created. The back-end name is a concatenation of the name of the IBM Storwize/SVC storage system as shown in lssystem, an underscore, and the name of the pool (mdisk group). For example:
```
capabilities:volume_back-end_name=myV7000_openstackpool
```
capabilities:compression_support - Specify a back-end according to compression support. A value of True should be used to request a back-end that supports compression, and a value of False will request a back-end that does not support compression. If you do not have constraints on compression support, do not set this key. Note that specifying True does not enable compression; it only requests that the volume be placed on a back-end that supports compression. Example syntax:
```
capabilities:compression_support='<is> True'
```
capabilities:easytier_support - Similar semantics as the compression_support key, but for specifying according to support of the Easy Tier feature. Example syntax:
```
capabilities:easytier_support='<is> True'
```
capabilities:storage_protocol - Specifies the connection protocol used to attach volumes of this type to instances. Legal values are iSCSI and FC. This extra specs value is used for both placement and setting the protocol used for this volume. In the example syntax, note <in> is used as opposed to <is> used in the previous examples.
```
capabilities:storage_protocol='<in> FC'
```

Configure per-volume creation options

Volume types can also be used to pass options to the IBM Storwize/SVC driver, which over-ride the default values set in the configuration file. Contrary to the previous examples where the "capabilities" scope was used to pass parameters to the Cinder scheduler, options can be passed to the IBM Storwize/SVC driver with the "drivers" scope.

The following extra specs keys are supported by the IBM Storwize/SVC driver:

rsize
warning
autoexpand
grainsize
compression
easytier
multipath
iogrp

These keys have the same semantics as their counterparts in the configuration file. They are set similarly; for example, rsize=2 or compression=False.

Example: Volume types

In the following example, we create a volume type to specify a controller that supports iSCSI and compression, to use iSCSI when attaching the volume, and to enable compression:

$ cinder type-create compressed
$ cinder type-key compressed set capabilities:storage_protocol='<in> iSCSI' capabilities:compression_support='<is> True' drivers:compression=True

We can then create a 50GB volume using this type:

$ cinder create --display-name "compressed volume" --volume-type compressed 50

Volume types can be used, for example, to provide users with different

performance levels (such as, allocating entirely on an HDD tier, using Easy Tier for an HDD-SDD mix, or allocating entirely on an SSD tier)
resiliency levels (such as, allocating volumes in pools with different RAID levels)
features (such as, enabling/disabling Real-time Compression)