[ English | Deutsch | español | Indonesia | English (United Kingdom) | русский ]

Пример маршрутизируемого окружения

В данной секции описывается пример готового к эксплуатации окружения для рабочего развертывания OpenStack-Ansible (OSA) с высокодоступными сервисами, где сети провайдера и соединение между физическими серверами маршрутизируются (layer 3)

Данное иллюстративное окружение имеет следующие характеристики:

  • Три инфраструктурных (управляющих) хоста

  • Два хоста под вычислительные ресурсы

  • Одно NFS устройство для данных

  • Один хост для сбора логов

  • Несколько сетевых карт (NIC), настроенных как агрегированные, для каждого хоста

  • Полный набор вычислительных сервисов с сервисом Телеметрии (ceilometer), с настроенным NFS, как хранилищем, для сервисов Образов (glance) и Блочного Хранилища (cinder)

  • Добавлены статические маршруты для связи между управляющей сетью, туннелированной сетью и сетью хранилища данных для каждого блока. Адрес шлюза это первый используемый адрес в каждой подсети.

../../_images/arch-layout-production.png

Настройка сети

Распределение сетевых CIDR/VLAN

Следующие CIDR назначения используются для данного окружения.

Сеть

CIDR

VLAN

Управляющая сеть блока 1

172.29.236.0/24

10

Туннелированная (VXLAN) сеть блока 1

172.29.237.0/24

30

Сеть хранилища данных блока 1

172.29.238.0/24

20

Управляющая сеть блока 2

172.29.239.0/24

10

Туннелированная (VXLAN) сеть блока 2

172.29.240.0/24

30

Сеть хранилища данных блока 2

172.29.241.0/24

20

Управляющая сеть блока 3

172.29.242.0/24

10

Туннелированная (VXLAN) сеть блока 3

172.29.243.0/24

30

Сеть хранилища данных блока 3

172.29.244.0/24

20

Управляющая сеть блока 4

172.29.245.0/24

10

Туннелированная (VXLAN) сеть блока 4

172.29.246.0/24

30

Сеть хранилища данных блока 4

172.29.247.0/24

20

Назначения IP

Следующие имена хостов и IP адреса используются для данного окружения.

Имя сервера

Управляющий IP

Туннелированный (VXLAN) IP

IP хранилища данных

lb_vip_address

172.29.236.9

infra1

172.29.236.10

172.29.237.10

infra2

172.29.239.10

172.29.240.10

infra3

172.29.242.10

172.29.243.10

log1

172.29.236.11

Хранилище NFS

172.29.244.15

compute1

172.29.245.10

172.29.246.10

172.29.247.10

compute2

172.29.245.11

172.29.246.11

172.29.247.11

Настройка сети сервера

На каждом сервере должны быть настроены корректные сетевые мосты. Ниже мы приводим файл /etc/network/interfaces для infra1.

Примечание

Если в вашем окружении нет интерфейса eth0, но вместо него используется p1p1, либо же какое-нибудь другое имя интерфейса, убедитесь, что все отсылки к eth0 в конфигурационных файлах заменены на подходящее имя. Это же применимо ко всем дополнительным сетевым интерфейсам.

# This is a multi-NIC bonded configuration to implement the required bridges
# for OpenStack-Ansible. This illustrates the configuration of the first
# Infrastructure host and the IP addresses assigned should be adapted
# for implementation on the other hosts.
#
# After implementing this configuration, the host will need to be
# rebooted.

# Assuming that eth0/1 and eth2/3 are dual port NIC's we pair
# eth0 with eth2 and eth1 with eth3 for increased resiliency
# in the case of one interface card failing.
auto eth0
iface eth0 inet manual
    bond-master bond0
    bond-primary eth0

auto eth1
iface eth1 inet manual
    bond-master bond1
    bond-primary eth1

auto eth2
iface eth2 inet manual
    bond-master bond0

auto eth3
iface eth3 inet manual
    bond-master bond1

# Create a bonded interface. Note that the "bond-slaves" is set to none. This
# is because the bond-master has already been set in the raw interfaces for
# the new bond0.
auto bond0
iface bond0 inet manual
    bond-slaves none
    bond-mode active-backup
    bond-miimon 100
    bond-downdelay 200
    bond-updelay 200

# This bond will carry VLAN and VXLAN traffic to ensure isolation from
# control plane traffic on bond0.
auto bond1
iface bond1 inet manual
    bond-slaves none
    bond-mode active-backup
    bond-miimon 100
    bond-downdelay 250
    bond-updelay 250

# Container/Host management VLAN interface
auto bond0.10
iface bond0.10 inet manual
    vlan-raw-device bond0

# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
auto bond1.30
iface bond1.30 inet manual
    vlan-raw-device bond1

# Storage network VLAN interface (optional)
auto bond0.20
iface bond0.20 inet manual
    vlan-raw-device bond0

# Container/Host management bridge
auto br-mgmt
iface br-mgmt inet static
    bridge_stp off
    bridge_waitport 0
    bridge_fd 0
    bridge_ports bond0.10
    address 172.29.236.10
    netmask 255.255.255.0
    gateway 172.29.236.1
    dns-nameservers 8.8.8.8 8.8.4.4

# OpenStack Networking VXLAN (tunnel/overlay) bridge
#
# The COMPUTE, NETWORK and INFRA nodes must have an IP address
# on this bridge.
#
auto br-vxlan
iface br-vxlan inet static
    bridge_stp off
    bridge_waitport 0
    bridge_fd 0
    bridge_ports bond1.30
    address 172.29.237.10
    netmask 255.255.252.0

# OpenStack Networking VLAN bridge
auto br-vlan
iface br-vlan inet manual
    bridge_stp off
    bridge_waitport 0
    bridge_fd 0
    bridge_ports bond1

# compute1 Network VLAN bridge
#auto br-vlan
#iface br-vlan inet manual
#    bridge_stp off
#    bridge_waitport 0
#    bridge_fd 0
#
# For tenant vlan support, create a veth pair to be used when the neutron
# agent is not containerized on the compute hosts. 'eth12' is the value used on
# the host_bind_override parameter of the br-vlan network section of the
# openstack_user_config example file. The veth peer name must match the value
# specified on the host_bind_override parameter.
#
# When the neutron agent is containerized it will use the container_interface
# value of the br-vlan network, which is also the same 'eth12' value.
#
# Create veth pair, do not abort if already exists
#    pre-up ip link add br-vlan-veth type veth peer name eth12 || true
# Set both ends UP
#    pre-up ip link set br-vlan-veth up
#    pre-up ip link set eth12 up
# Delete veth pair on DOWN
#    post-down ip link del br-vlan-veth || true
#    bridge_ports bond1 br-vlan-veth

# Storage bridge (optional)
#
# Only the COMPUTE and STORAGE nodes must have an IP address
# on this bridge. When used by infrastructure nodes, the
# IP addresses are assigned to containers which use this
# bridge.
#
auto br-storage
iface br-storage inet manual
    bridge_stp off
    bridge_waitport 0
    bridge_fd 0
    bridge_ports bond0.20

# compute1 Storage bridge
#auto br-storage
#iface br-storage inet static
#    bridge_stp off
#    bridge_waitport 0
#    bridge_fd 0
#    bridge_ports bond0.20
#    address 172.29.247.10
#    netmask 255.255.255.0

Настройка развертывания

Планировка окружения

Файл /etc/openstack_deploy/openstack_user_config.yml определяет, как будет выглядеть окружение.

Для каждого блока должна быть задана группа, содержащая все хосты для данного блока.

С определенными сетями провайдера, address_prefix используется для переопределения префикса ключа, добавленного на каждый хост, который содержит информацию об IP адресе. Это, обычно, должен быть один из container, tunnel или storage. reference_group содержит имя определенной группы и используется для ограничения зоны видимости каждой сети провайдера к данной группе.

Статические маршруты добавлены для коммуникации сетей провайдера между блоками.

Следующая настройка описывает устройство данного окружения.

---
cidr_networks:
  pod1_container: 172.29.236.0/24
  pod2_container: 172.29.237.0/24
  pod3_container: 172.29.238.0/24
  pod4_container: 172.29.239.0/24
  pod1_tunnel: 172.29.240.0/24
  pod2_tunnel: 172.29.241.0/24
  pod3_tunnel: 172.29.242.0/24
  pod4_tunnel: 172.29.243.0/24
  pod1_storage: 172.29.244.0/24
  pod2_storage: 172.29.245.0/24
  pod3_storage: 172.29.246.0/24
  pod4_storage: 172.29.247.0/24

used_ips:
  - "172.29.236.1,172.29.236.50"
  - "172.29.237.1,172.29.237.50"
  - "172.29.238.1,172.29.238.50"
  - "172.29.239.1,172.29.239.50"
  - "172.29.240.1,172.29.240.50"
  - "172.29.241.1,172.29.241.50"
  - "172.29.242.1,172.29.242.50"
  - "172.29.243.1,172.29.243.50"
  - "172.29.244.1,172.29.244.50"
  - "172.29.245.1,172.29.245.50"
  - "172.29.246.1,172.29.246.50"
  - "172.29.247.1,172.29.247.50"

global_overrides:
  #
  # The below domains name must resolve to an IP address
  # in the CIDR specified in haproxy_keepalived_external_vip_cidr and
  # haproxy_keepalived_internal_vip_cidr.
  # If using different protocols (https/http) for the public/internal
  # endpoints the two addresses must be different.
  #
  internal_lb_vip_address: internal-openstack.example.com
  external_lb_vip_address: openstack.example.com
  management_bridge: "br-mgmt"
  provider_networks:
    - network:
        container_bridge: "br-mgmt"
        container_type: "veth"
        container_interface: "eth1"
        ip_from_q: "pod1_container"
        address_prefix: "management"
        type: "raw"
        group_binds:
          - all_containers
          - hosts
        reference_group: "pod1_hosts"
        is_management_address: true
        # Containers in pod1 need routes to the container networks of other pods
        static_routes:
          # Route to container networks
          - cidr: 172.29.236.0/22
            gateway: 172.29.236.1
    - network:
        container_bridge: "br-mgmt"
        container_type: "veth"
        container_interface: "eth1"
        ip_from_q: "pod2_container"
        address_prefix: "management"
        type: "raw"
        group_binds:
          - all_containers
          - hosts
        reference_group: "pod2_hosts"
        is_management_address: true
        # Containers in pod2 need routes to the container networks of other pods
        static_routes:
          # Route to container networks
          - cidr: 172.29.236.0/22
            gateway: 172.29.237.1
    - network:
        container_bridge: "br-mgmt"
        container_type: "veth"
        container_interface: "eth1"
        ip_from_q: "pod3_container"
        address_prefix: "management"
        type: "raw"
        group_binds:
          - all_containers
          - hosts
        reference_group: "pod3_hosts"
        is_management_address: true
        # Containers in pod3 need routes to the container networks of other pods
        static_routes:
          # Route to container networks
          - cidr: 172.29.236.0/22
            gateway: 172.29.238.1
    - network:
        container_bridge: "br-mgmt"
        container_type: "veth"
        container_interface: "eth1"
        ip_from_q: "pod4_container"
        address_prefix: "management"
        type: "raw"
        group_binds:
          - all_containers
          - hosts
        reference_group: "pod4_hosts"
        is_management_address: true
        # Containers in pod4 need routes to the container networks of other pods
        static_routes:
          # Route to container networks
          - cidr: 172.29.236.0/22
            gateway: 172.29.239.1
    - network:
        container_bridge: "br-vxlan"
        container_type: "veth"
        container_interface: "eth10"
        ip_from_q: "pod1_tunnel"
        address_prefix: "tunnel"
        type: "vxlan"
        range: "1:1000"
        net_name: "vxlan"
        group_binds:
          - neutron_linuxbridge_agent
        reference_group: "pod1_hosts"
        # Containers in pod1 need routes to the tunnel networks of other pods
        static_routes:
          # Route to tunnel networks
          - cidr: 172.29.240.0/22
            gateway: 172.29.240.1
    - network:
        container_bridge: "br-vxlan"
        container_type: "veth"
        container_interface: "eth10"
        ip_from_q: "pod2_tunnel"
        address_prefix: "tunnel"
        type: "vxlan"
        range: "1:1000"
        net_name: "vxlan"
        group_binds:
          - neutron_linuxbridge_agent
        reference_group: "pod2_hosts"
        # Containers in pod2 need routes to the tunnel networks of other pods
        static_routes:
          # Route to tunnel networks
          - cidr: 172.29.240.0/22
            gateway: 172.29.241.1
    - network:
        container_bridge: "br-vxlan"
        container_type: "veth"
        container_interface: "eth10"
        ip_from_q: "pod3_tunnel"
        address_prefix: "tunnel"
        type: "vxlan"
        range: "1:1000"
        net_name: "vxlan"
        group_binds:
          - neutron_linuxbridge_agent
        reference_group: "pod3_hosts"
        # Containers in pod3 need routes to the tunnel networks of other pods
        static_routes:
          # Route to tunnel networks
          - cidr: 172.29.240.0/22
            gateway: 172.29.242.1
    - network:
        container_bridge: "br-vxlan"
        container_type: "veth"
        container_interface: "eth10"
        ip_from_q: "pod4_tunnel"
        address_prefix: "tunnel"
        type: "vxlan"
        range: "1:1000"
        net_name: "vxlan"
        group_binds:
          - neutron_linuxbridge_agent
        reference_group: "pod4_hosts"
        # Containers in pod4 need routes to the tunnel networks of other pods
        static_routes:
          # Route to tunnel networks
          - cidr: 172.29.240.0/22
            gateway: 172.29.243.1
    - network:
        container_bridge: "br-vlan"
        container_type: "veth"
        container_interface: "eth12"
        host_bind_override: "eth12"
        type: "flat"
        net_name: "physnet2"
        group_binds:
          - neutron_linuxbridge_agent
    - network:
        container_bridge: "br-vlan"
        container_type: "veth"
        container_interface: "eth11"
        type: "vlan"
        range: "101:200,301:400"
        net_name: "physnet1"
        group_binds:
          - neutron_linuxbridge_agent
    - network:
        container_bridge: "br-storage"
        container_type: "veth"
        container_interface: "eth2"
        ip_from_q: "pod1_storage"
        address_prefix: "storage"
        type: "raw"
        group_binds:
          - glance_api
          - cinder_api
          - cinder_volume
          - nova_compute
        reference_group: "pod1_hosts"
        # Containers in pod1 need routes to the storage networks of other pods
        static_routes:
          # Route to storage networks
          - cidr: 172.29.244.0/22
            gateway: 172.29.244.1
    - network:
        container_bridge: "br-storage"
        container_type: "veth"
        container_interface: "eth2"
        ip_from_q: "pod2_storage"
        address_prefix: "storage"
        type: "raw"
        group_binds:
          - glance_api
          - cinder_api
          - cinder_volume
          - nova_compute
        reference_group: "pod2_hosts"
        # Containers in pod2 need routes to the storage networks of other pods
        static_routes:
          # Route to storage networks
          - cidr: 172.29.244.0/22
            gateway: 172.29.245.1
    - network:
        container_bridge: "br-storage"
        container_type: "veth"
        container_interface: "eth2"
        ip_from_q: "pod3_storage"
        address_prefix: "storage"
        type: "raw"
        group_binds:
          - glance_api
          - cinder_api
          - cinder_volume
          - nova_compute
        reference_group: "pod3_hosts"
        # Containers in pod3 need routes to the storage networks of other pods
        static_routes:
          # Route to storage networks
          - cidr: 172.29.244.0/22
            gateway: 172.29.246.1
    - network:
        container_bridge: "br-storage"
        container_type: "veth"
        container_interface: "eth2"
        ip_from_q: "pod4_storage"
        address_prefix: "storage"
        type: "raw"
        group_binds:
          - glance_api
          - cinder_api
          - cinder_volume
          - nova_compute
        reference_group: "pod4_hosts"
        # Containers in pod4 need routes to the storage networks of other pods
        static_routes:
          # Route to storage networks
          - cidr: 172.29.244.0/22
            gateway: 172.29.247.1

###
### Infrastructure
###

pod1_hosts: &pod1
  infra1:
    ip: 172.29.236.10

pod2_hosts: &pod2
  infra2:
    ip: 172.29.239.10

pod3_hosts: &pod3
  infra3:
    ip: 172.29.242.10

pod4_hosts: &pod4
  compute1:
    ip: 172.29.245.10
  compute2:
    ip: 172.29.245.11

# galera, memcache, rabbitmq, utility
shared-infra_hosts: &controllers
  <<: *pod1
  <<: *pod2
  <<: *pod3

# repository (apt cache, python packages, etc)
repo-infra_hosts: *controllers

# load balancer
# Ideally the load balancer should not use the Infrastructure hosts.
# Dedicated hardware is best for improved performance and security.
load_balancer_hosts: *controllers

###
### OpenStack
###

# keystone
identity_hosts: *controllers

# cinder api services
storage-infra_hosts: *controllers

# glance
# The settings here are repeated for each infra host.
# They could instead be applied as global settings in
# user_variables, but are left here to illustrate that
# each container could have different storage targets.
image_hosts:
  infra1:
    ip: 172.29.236.11
    container_vars:
      limit_container_types: glance
      glance_remote_client:
        - what: "172.29.244.15:/images"
          where: "/var/lib/glance/images"
          type: "nfs"
          options: "_netdev,auto"
  infra2:
    ip: 172.29.236.12
    container_vars:
      limit_container_types: glance
      glance_remote_client:
        - what: "172.29.244.15:/images"
          where: "/var/lib/glance/images"
          type: "nfs"
          options: "_netdev,auto"
  infra3:
    ip: 172.29.236.13
    container_vars:
      limit_container_types: glance
      glance_remote_client:
        - what: "172.29.244.15:/images"
          where: "/var/lib/glance/images"
          type: "nfs"
          options: "_netdev,auto"

# nova api, conductor, etc services
compute-infra_hosts: *controllers

# heat
orchestration_hosts: *controllers

# horizon
dashboard_hosts: *controllers

# neutron server, agents (L3, etc)
network_hosts: *controllers

# ceilometer (telemetry data collection)
metering-infra_hosts: *controllers

# aodh (telemetry alarm service)
metering-alarm_hosts: *controllers
# gnocchi (telemetry metrics storage)
metrics_hosts: *controllers

# nova hypervisors
compute_hosts: *pod4

# ceilometer compute agent (telemetry data collection)
metering-compute_hosts: *pod4

# cinder volume hosts (NFS-backed)
# The settings here are repeated for each infra host.
# They could instead be applied as global settings in
# user_variables, but are left here to illustrate that
# each container could have different storage targets.
storage_hosts:
  infra1:
    ip: 172.29.236.11
    container_vars:
      cinder_backends:
        limit_container_types: cinder_volume
        nfs_volume:
          volume_backend_name: NFS_VOLUME1
          volume_driver: cinder.volume.drivers.nfs.NfsDriver
          nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
          nfs_shares_config: /etc/cinder/nfs_shares
          shares:
            - ip: "172.29.244.15"
              share: "/vol/cinder"
  infra2:
    ip: 172.29.236.12
    container_vars:
      cinder_backends:
        limit_container_types: cinder_volume
        nfs_volume:
          volume_backend_name: NFS_VOLUME1
          volume_driver: cinder.volume.drivers.nfs.NfsDriver
          nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
          nfs_shares_config: /etc/cinder/nfs_shares
          shares:
            - ip: "172.29.244.15"
              share: "/vol/cinder"
  infra3:
    ip: 172.29.236.13
    container_vars:
      cinder_backends:
        limit_container_types: cinder_volume
        nfs_volume:
          volume_backend_name: NFS_VOLUME1
          volume_driver: cinder.volume.drivers.nfs.NfsDriver
          nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
          nfs_shares_config: /etc/cinder/nfs_shares
          shares:
            - ip: "172.29.244.15"
              share: "/vol/cinder"

Индивидуальная настройка окружения

Опционально размещаемые файлы в /etc/openstack_deploy/env.d позволяют модифицировать группы Ansible. Это позволяет оператору задать, будут ли сервисы запущены в контейнере (по умолчанию), либо же на сервере (без контейнера).

Для данного окружения, cinder-volume работает в контейнере на инфраструктурных хостах. Что бы сделать это, создайте файл /etc/openstack_deploy/env.d/cinder.yml со следующим содержанием:

---
# This file contains an example to show how to set
# the cinder-volume service to run in a container.
#
# Important note:
# When using LVM or any iSCSI-based cinder backends, such as NetApp with
# iSCSI protocol, the cinder-volume service *must* run on metal.
# Reference: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1226855

container_skel:
  cinder_volumes_container:
    properties:
      is_metal: false

You can also declare a custom group for each pod that will also include all containers from hosts that belong to this pod. This might be handy if you want to define some variable for all hosts in the pod using group_variables.

For that create /etc/openstack_deploy/env.d/pod.yml with the following content:

---

component_skel:
  pod1_containers:
    belongs_to:
      - pod1_all
  pod1_hosts:
    belongs_to:
      - pod1_all

  pod2_containers:
    belongs_to:
      - pod2_all
  pod2_hosts:
    belongs_to:
      - pod2_all

  pod3_containers:
    belongs_to:
      - pod3_all
  pod3_hosts:
    belongs_to:
      - pod3_all

  pod4_containers:
    belongs_to:
      - pod3_all
  pod4_hosts:
    belongs_to:
      - pod3_all

container_skel:
  pod1_containers:
    properties:
      is_nest: True
  pod2_containers:
    properties:
      is_nest: True
  pod3_containers:
    properties:
      is_nest: True
  pod4_containers:
    properties:
      is_nest: True

Above example will create following groups:

  • podN_hosts which will contain only bare metal nodes

  • podN_containers that will contain all containers that are spawned on

    bare metal nodes, that are part of the pod.

  • podN_all that will contain podN_hosts and podN_containers members

Пользовательские переменные

В файле /etc/openstack_deploy/user_variables.yml расположены глобальные переопределения стандартных переменных.

В данном окружении распределитель нагрузки размещен на инфраструктурных хостах. Убедитесь, что keepalived также настроен совместно с HAProxy, разместив следующее содержание в файле /etc/openstack_deploy/user_variables.yml .

---
# This file contains an example of the global variable overrides
# which may need to be set for a production environment.
# These variables must be defined when external_lb_vip_address or
# internal_lb_vip_address is set to FQDN.
## Load Balancer Configuration (haproxy/keepalived)
haproxy_keepalived_external_vip_cidr: "<external_vip_address>/<netmask>"
haproxy_keepalived_internal_vip_cidr: "172.29.236.9/32"
haproxy_keepalived_external_interface: ens2
haproxy_keepalived_internal_interface: br-mgmt