Installation Guide¶
Now the Tricircle can be played with Devstack for all-in-one single pod and multi-pod. You can build different Tricircle environments with Devstack according to your needs. In the near future there will be a manual installation guide in this installation guide that discussing how to install the Tricircle step by step without DevStack for users who install OpenStack manually.
Single pod installation with DevStack¶
Now the Tricircle can be played with all-in-one single pod DevStack. For the resource requirement to setup single pod DevStack, please refer to All-In-One Single Machine for installing DevStack in bare metal server or All-In-One Single VM for installing DevStack in virtual machine.
1 Install DevStack. Please refer to DevStack document on how to install DevStack into single VM or bare metal server.
2 In DevStack folder, create a file local.conf, and copy the content of https://github.com/openstack/tricircle/blob/master/devstack/local.conf.sample to local.conf, change password in the file if needed.
3 Run DevStack. In DevStack folder, run
./stack.sh
4 After DevStack successfully starts, we need to create environment variables for the user (admin user as example in this document). In DevStack folder
source openrc admin demo
5 Unset the region name environment variable, so that the command can be issued to specified region in following commands as needed
unset OS_REGION_NAME
6 Check if services have been correctly registered. Run
openstack --os-region-name=RegionOne endpoint list
you should get output looks like as following
+----------------------------------+---------------+--------------+----------------+ | ID | Region | Service Name | Service Type | +----------------------------------+---------------+--------------+----------------+ | 3944592550764e349d0e82dba19a8e64 | RegionOne | cinder | volume | | 2ce48c73cca44e66a558ad69f1aa4436 | CentralRegion | tricircle | Tricircle | | d214b688923a4348b908525266db66ed | RegionOne | nova_legacy | compute_legacy | | c5dd60f23f2e4442865f601758a73982 | RegionOne | keystone | identity | | a99d5742c76a4069bb8621e0303c6004 | RegionOne | cinderv3 | volumev3 | | 8a3c711a24b2443a9a4420bcc302ed2c | RegionOne | glance | image | | e136af00d64a4cdf8b6b367210476f49 | RegionOne | nova | compute | | 4c3e5d52a90e493ab720213199ab22cd | RegionOne | neutron | network | | 8a1312afb6944492b47c5a35f1e5caeb | RegionOne | cinderv2 | volumev2 | | e0a5530abff749e1853a342b5747492e | CentralRegion | neutron | network | +----------------------------------+---------------+--------------+----------------+
“CentralRegion” is the region you set in local.conf via CENTRAL_REGION_NAME, whose default value is “CentralRegion”, we use it as the region for the central Neutron server and Tricircle Admin API(ID is 2ce48c73cca44e66a558ad69f1aa4436 in the above list). “RegionOne” is the normal OpenStack region which includes Nova, Cinder, Neutron.
7 Create pod instances for the Tricircle to manage the mapping between availability zone and OpenStack instances
openstack multiregion networking pod create --region-name CentralRegion openstack multiregion networking pod create --region-name RegionOne --availability-zone az1
Pay attention to “region_name” parameter we specify when creating pod. Pod name should exactly match the region name registered in Keystone. In the above commands, we create pods named “CentralRegion” and “RegionOne”.
8 Create necessary resources in central Neutron server
neutron --os-region-name=CentralRegion net-create --availability-zone-hint RegionOne net1 neutron --os-region-name=CentralRegion subnet-create net1 10.0.0.0/24
Please note that the net1 ID will be used in later step to boot VM.
9 Get image ID and flavor ID which will be used in VM booting
glance --os-region-name=RegionOne image-list nova --os-region-name=RegionOne flavor-list
10 Boot a virtual machine
nova --os-region-name=RegionOne boot --flavor 1 --image $image_id --nic net-id=$net_id vm1
11 Verify the VM is connected to the net1
neutron --os-region-name=CentralRegion port-list neutron --os-region-name=RegionOne port-list nova --os-region-name=RegionOne list
The IP address of the VM could be found in local Neutron server and central Neutron server. The port has same uuid in local Neutron server and central Neutron Server.
Multi-pod Installation with DevStack¶
Introduction¶
In the single pod installation guide, we discuss how to deploy the Tricircle in one single pod with DevStack. Besides the Tricircle API and the central Neutron server, only one pod(one pod means one OpenStack instance) is running. Network is created with the default network type: local. Local type network will be only presented in one pod. If a local type network is already hosting virtual machines in one pod, you can not use it to boot virtual machine in another pod. That is to say, local type network doesn’t support cross-Neutron l2 networking.
With multi-pod installation of the Tricircle, you can try out cross-Neutron l2 networking and cross-Neutron l3 networking features.
To support cross-Neutron l2 networking, we have added both VLAN and VxLAN network type to the Tricircle. When a VLAN type network created via the central Neutron server is used to boot virtual machines in different pods, local Neutron server in each pod will create a VLAN type network with the same VLAN ID and physical network as the central network, so each pod should be configured with the same VLAN allocation pool and physical network. Then virtual machines in different pods can communicate with each other in the same physical network with the same VLAN tag. Similarly, for VxLAN network type, each pod should be configured with the same VxLAN allocation pool, so local Neutron server in each pod can create a VxLAN type network with the same VxLAN ID as is allocated by the central Neutron server.
Cross-Neutron l3 networking is supported in two ways in the Tricircle. If two networks connected to the router are of local type, we utilize a shared VLAN or VxLAN network to achieve cross-Neutron l3 networking. When a subnet is attached to a router via the central Neutron server, the Tricircle not only creates corresponding subnet and router in the pod, but also creates a “bridge” network. Both tenant network and “bridge” network are attached to the router. Each tenant will have one allocated VLAN or VxLAN ID, which is shared by the tenant’s “bridge” networks across Neutron servers. The CIDRs of “bridge” networks for one tenant are also the same, so the router interfaces in “bridge” networks across different Neutron servers can communicate with each other. By adding an extra route as following:
destination: CIDR of tenant network in another pod
nexthop: "bridge" network interface ip in another pod
When a virtual machine sends a packet whose receiver is in another network and in another pod, the packet first goes to router, then is forwarded to the router in another pod according to the extra route, at last the packet is sent to the target virtual machine. This route configuration job is triggered when user attaches a subnet to a router via the central Neutron server and the job is finished asynchronously.
If one of the network connected to the router is not local type, meaning that cross-Neutron l2 networking is supported in this network(like VLAN type), and the l2 network can be stretched into current pod, packets sent to the virtual machine in this network will not pass through the “bridge” network. Instead, packets first go to router, then are directly forwarded to the target virtual machine via the l2 network. A l2 network’s presence scope is determined by the network’s availability zone hint. If the l2 network is not able to be stretched into the current pod, the packets will still pass through the “bridge network”. For example, let’s say we have two pods, pod1 and pod2, and two availability zones, az1 and az2. Pod1 belongs to az1 and pod2 belongs to az2. If the availability zone hint of one VLAN type network is set to az1, this network can not be stretched to pod2. So packets sent from pod2 to virtual machines in this network still need to pass through the “bridge network”.
Prerequisite¶
In this guide we take two nodes deployment as an example. One node to run the Tricircle API, the central Neutron server and one pod, the other one node to run another pod. For VLAN network, both nodes should have two network interfaces, which are connected to the management network and provider VLAN network. The physical network infrastructure should support VLAN tagging. For VxLAN network, you can combine the management plane and data plane, in this case, only one network interface is needed. If you would like to try north-south networking, too, you should prepare one more network interface in the second node for the external network. In this guide, the external network is also VLAN type, so the local.conf sample is based on VLAN type external network setup. For the resource requirements to setup each node, please refer to All-In-One Single Machine for installing DevStack in bare metal server and All-In-One Single VM for installing DevStack in virtual machine.
If you want to experience cross Neutron VxLAN network, please make sure compute nodes are routable to each other on data plane, and enable L2 population mechanism driver in OpenStack RegionOne and OpenStack RegionTwo.
Setup¶
In pod1 in node1 for Tricircle service, central Neutron and OpenStack RegionOne,
1 Install DevStack. Please refer to DevStack document on how to install DevStack into single VM or bare metal server.
2 In DevStack folder, create a file local.conf, and copy the content of local.conf node1 sample to local.conf, change password in the file if needed.
3 Change the following options according to your environment
change HOST_IP to your management interface ip:
HOST_IP=10.250.201.24
the format of Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS is (network_vlan_ranges=<physical network name>:<min vlan>:<max vlan>), you can change physical network name, but remember to adapt your change to the commands showed in this guide; also, change min VLAN and max vlan to adapt the VLAN range your physical network supports. You need to additionally specify the physical network “extern” to ensure the central neutron can create “extern” physical network which located in other pods:
Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS=(network_vlan_ranges=bridge:2001:3000,extern:3001:4000)
if you would like to also configure vxlan network, you can set Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS. the format of it is (vni_ranges=<min vxlan>:<max vxlan>):
Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS=(vni_ranges=1001:2000)
the format of OVS_BRIDGE_MAPPINGS is <physical network name>:<ovs bridge name>, you can change these names, but remember to adapt your change to the commands showed in this guide. You do not need specify the bridge mapping for “extern”, because this physical network is located in other pods:
OVS_BRIDGE_MAPPINGS=bridge:br-vlan
this option can be omitted if only VxLAN networks are needed
if you would like to also configure flat network, you can set Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS, the format of it is (flat_networks=phy_net1,phy_net2,…). Besides specifying a list of physical network names, you can also use ‘*’ to allow flat networks with arbitrary physical network names; or use an empty list to disable flat networks. For simplicity, we use the same physical networks and bridge mappings for vlan and flat network configuration. Similar to vlan network, You need to additionally specify the physical network “extern” to ensure the central neutron can create “extern” physical network which located in other pods:
Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS=(flat_networks=bridge,extern)
set TRICIRCLE_START_SERVICES to True to install the Tricircle service and central Neutron in node1:
TRICIRCLE_START_SERVICES=True
4 Create OVS bridge and attach the VLAN network interface to it
sudo ovs-vsctl add-br br-vlan sudo ovs-vsctl add-port br-vlan eth1
br-vlan is the OVS bridge name you configure on OVS_PHYSICAL_BRIDGE, eth1 is the device name of your VLAN network interface, this step can be omitted if only VxLAN networks are provided to tenants.
5 Run DevStack. In DevStack folder, run
./stack.sh
6 After DevStack successfully starts, begin to setup node2.
In pod2 in node2 for OpenStack RegionTwo,
1 Install DevStack. Please refer to DevStack document on how to install DevStack into single VM or bare metal server.
2 In DevStack folder, create a file local.conf, and copy the content of local.conf node2 sample to local.conf, change password in the file if needed.
3 Change the following options according to your environment
change HOST_IP to your management interface ip:
HOST_IP=10.250.201.25
change KEYSTONE_SERVICE_HOST to management interface ip of node1:
KEYSTONE_SERVICE_HOST=10.250.201.24
change KEYSTONE_AUTH_HOST to management interface ip of node1:
KEYSTONE_AUTH_HOST=10.250.201.24
the format of Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS is (network_vlan_ranges=<physical network name>:<min vlan>:<max vlan>), you can change physical network name, but remember to adapt your change to the commands showed in this guide; also, change min vlan and max vlan to adapt the vlan range your physical network supports:
Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS=(network_vlan_ranges=bridge:2001:3000,extern:3001:4000)
if you would like to also configure vxlan network, you can set Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS. the format of it is (vni_ranges=<min vxlan>:<max vxlan>):
Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS=(vni_ranges=1001:2000)
the format of OVS_BRIDGE_MAPPINGS is <physical network name>:<ovs bridge name>, you can change these names, but remember to adapt your change to the commands showed in this guide:
OVS_BRIDGE_MAPPINGS=bridge:br-vlan,extern:br-ext
if you only use vlan network for external network, it can be configured like:
OVS_BRIDGE_MAPPINGS=extern:br-ext
if you would like to also configure flat network, you can set Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS, the format of it is (flat_networks=phy_net1,phy_net2,…). Besides specifying a list of physical network names, you can also use ‘*’ to allow flat networks with arbitrary physical network names; or use an empty list to disable flat networks. For simplicity, we use the same physical networks and bridge mappings for vlan and flat network configuration:
Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS=(flat_networks=bridge,extern)
set TRICIRCLE_START_SERVICES to False(it’s True by default) so Tricircle services and central Neutron will not be started in node2:
TRICIRCLE_START_SERVICES=False
In this guide, we define two physical networks in node2, one is “bridge” for bridge network, the other one is “extern” for external network. If you do not want to try l3 north-south networking, you can simply remove the “extern” part. The external network type we use in the guide is VLAN, if you want to use other network type like flat, please refer to DevStack document.
4 Create OVS bridge and attach the VLAN network interface to it
sudo ovs-vsctl add-br br-vlan sudo ovs-vsctl add-port br-vlan eth1 sudo ovs-vsctl add-br br-ext sudo ovs-vsctl add-port br-ext eth2
br-vlan and br-ext are the OVS bridge names you configure on OVS_PHYSICAL_BRIDGE, eth1 and eth2 are the device names of your VLAN network interfaces, for the “bridge” network and the external network. Omit br-vlan if you only use vxlan network as tenant network.
5 Run DevStack. In DevStack folder, run
./stack.sh
6 After DevStack successfully starts, the setup is finished.
Note
In the newest version of codes, we may fail to boot an instance in node2. The reason is that Apache configuration file of Nova placement API doesn’t grant access right to the placement API bin folder. You can use “screen -r” to check placement API is working well or not. If placement API is in stuck status, manually update “/etc/apache2/sites-enabled/placement-api.conf” placement API configuration file in node2 to add the following section:
<Directory /usr/local/bin>
Require all granted
</Directory>
After update, restart Apache service first, and then placement API.
This problem no longer exists after this patch:
https://github.com/openstack-dev/devstack/commit/6ed53156b6198e69d59d1cf3a3497e96f5b7a870
How to play¶
1 After DevStack successfully starts, we need to create environment variables for the user (admin user as example in this guide). In DevStack folder
source openrc admin demo
2 Unset the region name environment variable, so that the command can be issued to specified region in following commands as needed
unset OS_REGION_NAME
3 Check if services have been correctly registered. Run
openstack --os-region-name=RegionOne endpoint list
you should get output looks like as following
+----------------------------------+---------------+--------------+----------------+ | ID | Region | Service Name | Service Type | +----------------------------------+---------------+--------------+----------------+ | 4adaab1426d94959be46314b4bd277c2 | RegionOne | glance | image | | 5314a11d168042ed85a1f32d40030b31 | RegionTwo | nova_legacy | compute_legacy | | ea43c53a8ab7493dacc4db079525c9b1 | RegionOne | keystone | identity | | a1f263473edf4749853150178be1328d | RegionOne | neutron | network | | ebea16ec07d94ed2b5356fb0a2a3223d | RegionTwo | neutron | network | | 8d374672c09845f297755117ec868e11 | CentralRegion | tricircle | Tricircle | | e62e543bb9cf45f593641b2d00d72700 | RegionOne | nova_legacy | compute_legacy | | 540bdedfc449403b9befef3c2bfe3510 | RegionOne | nova | compute | | d533429712954b29b9f37debb4f07605 | RegionTwo | glance | image | | c8bdae9506cd443995ee3c89e811fb45 | CentralRegion | neutron | network | | 991d304dfcc14ccf8de4f00271fbfa22 | RegionTwo | nova | compute | +----------------------------------+---------------+--------------+----------------+
“CentralRegion” is the region you set in local.conf via CENTRAL_REGION_NAME, whose default value is “CentralRegion”, we use it as the region for the Tricircle API and central Neutron server. “RegionOne” and “RegionTwo” are the normal OpenStack regions which includes Nova, Neutron and Glance. Shared Keystone service is registered in “RegionOne”.
4 Create pod instances for the Tricircle to manage the mapping between availability zones and OpenStack instances
openstack multiregion networking pod create --region-name CentralRegion openstack multiregion networking pod create --region-name RegionOne --availability-zone az1 openstack multiregion networking pod create --region-name RegionTwo --availability-zone az2
Pay attention to “region_name” parameter we specify when creating pod. Pod name should exactly match the region name registered in Keystone. In the above commands, we create pods named “CentralRegion”, “RegionOne” and “RegionTwo”.
5 Create necessary resources in central Neutron server
neutron --os-region-name=CentralRegion net-create --availability-zone-hint RegionOne net1 neutron --os-region-name=CentralRegion subnet-create net1 10.0.1.0/24 neutron --os-region-name=CentralRegion net-create --availability-zone-hint RegionTwo net2 neutron --os-region-name=CentralRegion subnet-create net2 10.0.2.0/24
Please note that the net1 and net2 ID will be used in later step to boot VM.
6 Get image ID and flavor ID which will be used in VM booting
glance --os-region-name=RegionOne image-list nova --os-region-name=RegionOne flavor-list glance --os-region-name=RegionTwo image-list nova --os-region-name=RegionTwo flavor-list
7 Boot virtual machines
nova --os-region-name=RegionOne boot --flavor 1 --image $image1_id --nic net-id=$net1_id vm1 nova --os-region-name=RegionTwo boot --flavor 1 --image $image2_id --nic net-id=$net2_id vm2
8 Verify the VMs are connected to the networks
neutron --os-region-name=CentralRegion port-list neutron --os-region-name=RegionOne port-list nova --os-region-name=RegionOne list neutron --os-region-name=RegionTwo port-list nova --os-region-name=RegionTwo list
The ip address of each VM could be found in local Neutron server and central Neutron server. The port has same uuid in local Neutron server and central Neutron Server.
9 Create external network and subnet
neutron --os-region-name=CentralRegion net-create --router:external --provider:network_type vlan --provider:physical_network extern --availability-zone-hint RegionTwo ext-net neutron --os-region-name=CentralRegion subnet-create --name ext-subnet --disable-dhcp ext-net 163.3.124.0/24
Pay attention that when creating external network, we need to pass “availability_zone_hints” parameter, which is the name of the pod that will host external network.
Currently external network needs to be created before attaching subnet to the router, because plugin needs to utilize external network information to setup bridge network when handling interface adding operation. This limitation will be removed later.
10 Create router and attach subnets in central Neutron server
neutron --os-region-name=CentralRegion router-create router neutron --os-region-name=CentralRegion router-interface-add router $subnet1_id neutron --os-region-name=CentralRegion router-interface-add router $subnet2_id
11 Set router external gateway in central Neutron server
neutron --os-region-name=CentralRegion router-gateway-set router ext-net
Now virtual machine in the subnet attached to the router should be able to ping machines in the external network. In our test, we use hypervisor tool to directly start a virtual machine in the external network to check the network connectivity.
12 Launch VNC console and test connection
nova --os-region-name=RegionOne get-vnc-console vm1 novnc nova --os-region-name=RegionTwo get-vnc-console vm2 novnc
You should be able to ping vm1 from vm2 and vice versa.
13 Create floating ip in central Neutron server
neutron --os-region-name=CentralRegion floatingip-create ext-net
14 Associate floating ip
neutron --os-region-name=CentralRegion floatingip-list neutron --os-region-name=CentralRegion port-list neutron --os-region-name=CentralRegion floatingip-associate $floatingip_id $port_id
Now you should be able to access virtual machine with floating ip bound from the external network.
Manual Installation¶
The Tricircle works with Neutron to provide networking automation functionality across Neutron in multi-region OpenStack deployment. In this guide we discuss how to manually install the Tricircle with local and central Neutron server.
Local Neutron server, running with the Tricircle local plugin, is responsible for triggering cross-Neutron networking automation. Every OpenStack instance has one local Neutron service, registered in the same region with other core services like Nova, Cinder, Glance, etc. Central Neutron server, running with the Tricircle central plugin, is responsible for unified resource allocation and cross-Neutron networking building. Besides regions for each OpenStack instance, we also need one specific region for central Neutron service. Only the Tricircle administrator service needs to be registered in this region along with central Neutron service while other core services are not mandatory.
Installation with Central Neutron Server¶
1 Install the Tricircle package:
git clone https://github.com/openstack/tricircle.git cd tricircle pip install -e .
2 Register the Tricircle administrator API to Keystone:
openstack user create tricircle --password password openstack role add --project service --user tricircle service openstack service create tricircle --name tricircle --description "Cross Neutron Networking Automation Service" service_id=$(openstack service show tricircle -f value -c id) service_host=162.3.124.201 service_port=19999 service_region=CentralRegion service_url=http://$service_host:$service_port/v1.0 openstack endpoint create $service_id --publicurl $service_url --adminurl $service_url --internalurl $service_url --region $service_region
change password, service_host, service_port and service_region in the above commands to adapt your deployment. OpenStack CLI tool will automatically find the endpoints to send to registration requests. If you would like to specify the region for endpoints, use:
openstack --os-region-name <region_name> <command>
3 Generate the Tricircle configuration sample:
cd tricircle oslo-config-generator --config-file=etc/api-cfg-gen.conf oslo-config-generator --config-file=etc/xjob-cfg-gen.conf
The generated sample files are located in tricircle/etc
4 Configure the Tricircle administrator API:
cd tricircle/etc cp api.conf.sample api.conf
Edit etc/api.conf, for detail configuration information, please refer to the configuration guide. Below only options necessary to be changed are listed.
| Option | Description | Example |
|---|---|---|
| [DEFAULT] tricircle_db_connection | database connection string for tricircle | mysql+pymysql://root:password@ 127.0.0.1/tricircle?charset=utf8 |
| [DEFAULT] transport_url | a URL representing the used messaging driver and its full configuration | rabbit://user:password@ 127.0.0.1:5672 |
| [keystone_authtoken] auth_type | authentication method | password |
| [keystone_authtoken] auth_url | keystone authorization url | http://$keystone_service_host/identity |
| [keystone_authtoken] username | username of service account, needed for password authentication | tricircle |
| [keystone_authtoken] password | password of service account, needed for password authentication | password |
| [keystone_authtoken] user_domain_name | user domain name of service account, needed for password authentication | Default |
| [keystone_authtoken] project_name | project name of service account, needed for password authentication | service |
| [keystone_authtoken] project_domain_name | project domain name of service account, needed for password authentication | Default |
| [keystone_authtoken] auth_uri | complete public Identity API endpoint | http://$keystone_service_host/identity |
| [keystone_authtoken] cafile | A PEM encoded Certificate Authority to use when verifying HTTPs | /opt/stack/data/ca-bundle.pem |
| [keystone_authtoken] signing_dir | Directory used to cache files related to PKI tokens | /var/cache/tricircle |
| [keystone_authtoken] memcached_servers | Optionally specify a list of memcached server(s) to use for caching | $keystone_service_host:11211 |
| [client] auth_url | keystone authorization url | http://$keystone_service_host/identity |
| [client] identity_url | keystone service url | http://$keystone_service_host/identity/v3 |
| [client] auto_refresh_endpoint | if set to True, endpoint will be automatically refreshed if timeout accessing | True |
| [client] top_region_name | name of central region which client needs to access | CentralRegion |
| [client] admin_username | username of admin account | admin |
| [client] admin_password | password of admin account | password |
| [client] admin_tenant | project name of admin account | demo |
| [client] admin_user_domain_name | user domain name of admin account | Default |
| [client] admin_tenant_domain_name | project name of admin account | Default |
Note
The Tricircle utilizes the Oslo library to setup service, database, log and RPC, please refer to the configuration guide of the corresponding Oslo library if you need further configuration of these modules. Change keystone_service_host to the address of Keystone service.
Note
It’s worth explaining the following options that can easily make users confused. keystone_authtoken.auth_url is the keystone endpoint url used by services to validate user tokens. keystone_authtoken.auth_uri will be put in the “WWW-Authenticate: Keystone uri=%s” header in the 401 response to tell users where they can get authentication. These two URLs can be the same, but sometimes people would like to use an internal URL for auth_url and a public URL for auth_uri. client.auth_url is used by the common.client module to construct a client to get authentication and access other services, it can be the either internal or public endpoint of keystone, depends on how the module can reach keystone. client.identity_url is no longer used in code since Pike release so you can simply ignore it, we will deprecate and remove this option later.
5 Create the Tricircle database(take mysql as an example):
mysql -uroot -p -e "create database tricircle character set utf8;" cd tricircle tricircle-db-manage --config-file etc/api.conf db_sync
6 Start the Tricircle administrator API:
sudo mkdir /var/cache/tricircle sudo chown $(whoami) /var/cache/tricircle/ cd tricircle tricircle-api --config-file etc/api.conf
7 Configure the Tricircle Xjob daemon:
cd tricircle/etc cp xjob.conf.sample xjob.conf
Edit etc/xjob.conf, for detail configuration information, please refer to the configuration guide. Below only options necessary to be changed are listed.
| Option | Description | Example |
|---|---|---|
| [DEFAULT] tricircle_db_connection | database connection string for tricircle | mysql+pymysql://root:password@ 127.0.0.1/tricircle?charset=utf8 |
| [DEFAULT] transport_url | a URL representing the used messaging driver and its full configuration | rabbit://user:password@ 127.0.0.1:5672 |
| [client] auth_url | keystone authorization url | http://$keystone_service_host/identity |
| [client] identity_url | keystone service url | http://$keystone_service_host/identity/v3 |
| [client] auto_refresh_endpoint | if set to True, endpoint will be automatically refreshed if timeout accessing | True |
| [client] top_region_name | name of central region which client needs to access | CentralRegion |
| [client] admin_username | username of admin account | admin |
| [client] admin_password | password of admin account | password |
| [client] admin_tenant | project name of admin account | demo |
| [client] admin_user_domain_name | user domain name of admin account | Default |
| [client] admin_tenant_domain_name | project name of admin account | Default |
Note
The Tricircle utilizes the Oslo library to setup service, database, log and RPC, please refer to the configuration guide of the corresponding Oslo library if you need further configuration of these modules. Change keystone_service_host to the address of Keystone service.
8 Start the Tricircle Xjob daemon:
cd tricircle tricircle-xjob --config-file etc/xjob.conf
9 Setup central Neutron server
In this guide we assume readers are familiar with how to install Neutron server, so we just briefly discuss the steps and extra configuration needed by central Neutron server. For detail information about the configuration options in “client” and “tricircle” groups, please refer to the configuration guide. Neutron server can be installed alone, or you can install a full OpenStack instance then remove or stop other services.
install Neutron package
configure central Neutron server
edit neutron.conf
Option Description Example [database] connection database connection string for central Neutron server mysql+pymysql://root:password@ 127.0.0.1/neutron?charset=utf8 [DEFAULT] bind_port Port central Neutron server binds to change to a different value rather than 9696 if you run central and local Neutron server in the same host [DEFAULT] core_plugin core plugin central Neutron server uses tricircle.network.central_plugin. TricirclePlugin [DEFAULT] service_plugins service plugin central Neutron server uses (leave empty) [DEFAULT] tricircle_db_connection database connection string for tricircle mysql+pymysql://root:password@ 127.0.0.1/tricircle?charset=utf8 [client] auth_url keystone authorization url http://$keystone_service_host/identity [client] identity_url keystone service url http://$keystone_service_host/identity/v3 [client] auto_refresh_endpoint if set to True, endpoint will be automatically refreshed if timeout accessing True [client] top_region_name name of central region which client needs to access CentralRegion [client] admin_username username of admin account admin [client] admin_password password of admin account password [client] admin_tenant project name of admin account demo [client] admin_user_domain_name user domain name of admin account Default [client] admin_tenant_domain_name project name of admin account Default [tricircle] type_drivers list of network type driver entry points to be loaded vxlan,vlan,flat,local [tricircle] tenant_network_types ordered list of network_types to allocate as tenant networks vxlan,vlan,flat,local [tricircle] network_vlan_ranges physical network names and VLAN tags range usable of VLAN provider bridge:2001:3000 [tricircle] vni_ranges VxLAN VNI range 1001:2000 [tricircle] flat_networks physical network names with which flat networks can be created bridge [tricircle] bridge_network_type l3 bridge network type which is enabled in tenant_network_types and is not local type vxlan [tricircle] default_region_for_external_network Default Region where the external network belongs to RegionOne [tricircle] enable_api_gateway whether the API gateway is enabled False Note
Change keystone_service_host to the address of Keystone service.
- create database for central Neutron server
- register central Neutron server endpoint in Keystone, central Neutron should be registered in the same region with the Tricircle
- start central Neutron server
Installation with Local Neutron Server¶
1 Install the Tricircle package:
git clone https://github.com/openstack/tricircle.git cd tricircle pip install -e .
2 Setup local Neutron server
In this guide we assume readers have already installed a complete OpenStack instance running services like Nova, Cinder, Neutron, etc, so we just discuss how to configure Neutron server to work with the Tricircle. For detail information about the configuration options in “client” and “tricircle” groups, please refer to the configuration guide. After the change, you just restart the Neutron server.
edit neutron.conf.
Note
Pay attention to the service_plugins configuration item, make sure the plugin which is configured can support the association of floating IP to a port whose network is not directly attached to the router. To support it, TricircleL3Plugin is inherited from Neutron original L3RouterPlugin and overrides the original “get_router_for_floatingip” implementation. In order to configure local Neutron to use original L3RouterPlugin, you will need to patch the function “get_router_for_floatingip” in the same way that has been done for TricircleL3Plugin.
It’s not necessary to configure the service plugins if cross Neutron L2 networking is the only need in the deployment.
Option Description Example [DEFAULT] core_plugin core plugin local Neutron server uses tricircle.network.local_plugin. TricirclePlugin [DEFAULT] service_plugins service plugins local Neutron server uses tricircle.network.local_l3_plugin. TricircleL3Plugin [client] auth_url keystone authorization url http://$keystone_service_host/identity [client] identity_url keystone service url http://$keystone_service_host/identity/v3 [client] auto_refresh_endpoint if set to True, endpoint will be automatically refreshed if timeout accessing True [client] top_region_name name of central region which client needs to access CentralRegion [client] admin_username username of admin account admin [client] admin_password password of admin account password [client] admin_tenant project name of admin account demo [client] admin_user_domain_name user domain name of admin account Default [client] admin_tenant_domain_name project name of admin account Default [tricircle] real_core_plugin the core plugin the Tricircle local plugin invokes neutron.plugins.ml2.plugin. Ml2Plugin [tricircle] central_neutron_url central Neutron server url http://$neutron_service_host :9696 Note
Change keystone_service_host to the address of Keystone service, and neutron_service_host to the address of central Neutron service.
edit ml2_conf.ini
Option Description Example [ml2] mechanism_drivers add l2population if vxlan network is used openvswitch,l2population [agent] l2_population set to True if vxlan network is used True [agent] tunnel_types set to vxlan if vxlan network is used vxlan [ml2_type_vlan] network_vlan_ranges for a specific physical network, the vlan range should be the same with tricircle.network_vlan_ranges option for central Neutron, configure this option if vlan network is used bridge:2001:3000 [ml2_type_vxlan] vni_ranges should be the same with tricircle.vni_ranges option for central Neutron, configure this option if vxlan network is used 1001:2000 [ml2_type_flat] flat_networks should be part of the tricircle.network_vlan_ranges option for central Neutron, configure this option if flat network is used bridge [ovs] bridge_mappings map the physical network to an ovs bridge bridge:br-bridge Note
In tricircle.network_vlan_ranges option for central Neutron, all the available physical networks in all pods and their vlan ranges should be configured without duplication. It’s possible that one local Neutron doesn’t contain some of the physical networks configured in tricircle.network_vlan_ranges, in this case, users need to specify availability zone hints when creating network or booting instances in the correct pod, to ensure that the required physical network is available in the target pod.
Work with Nova cell v2(experiment)¶
Note
Multi-cell support of Nova cell v2 is under development. DevStack doesn’t support multi-cell deployment currently, so the steps discussed in this document may seem not that elegant. We will keep updating this document according to the progress of multi-cell development by Nova team.
Setup¶
- 1 Follow “Multi-pod Installation with DevStack” document to prepare your local.conf for both nodes, and set TRICIRCLE_DEPLOY_WITH_CELL to True for both nodes. Start DevStack in node1, then node2.
Note
After running DevStack in both nodes, a multi-cell environment will be prepared: there is one CentralRegion, where Nova API and central Neutron will be registered. Nova has two cells, node1 belongs to cell1, node2 belongs to cell2, and each cell will be configured to use a dedicated local Neutron. For cell1, it’s RegionOne Neutron in node1; for cell2, it’s RegionTwo Neutron in node2(you can set the region name in local.conf to make the name more friendly). End user can access CentralRegion endpoint of Nova and Neutron to experience the integration of Nova cell v2 and Tricircle.
2 Stop the following services in node2:
systemctl stop devstack@n-sch.service systemctl stop devstack@n-super-cond.service systemctl stop devstack@n-api.service systemctl stop devstack@n-api-meta.service
Note
Actually for cell v2, only one Nova API is required. We enable n-api in node2 because we need DevStack to help us create the necessary cell database. If n-api is disabled, neither API database nor cell database will be created.
3 In node2, run the following command:
mysql -u$user -p$password -Dnova_cell1 -e 'select host, mapped from compute_nodes'
you can see that this command returns you one row showing the host of node2 is already mapped:
+-----------+--------+ | host | mapped | +-----------+--------+ | zhiyuan-2 | 1 | +-----------+--------+
This host is registered to Nova API in node2, which is already stopped by us, We need to update this row to set “mapped” to 0:
mysql -u$user -p$password -Dnova_cell1 -e 'update compute_nodes set mapped = 0 where host = "zhiyuan-2"'
then we can register this host again in step4.
4 In node1, run the following commands to register the new cell:
nova-manage cell_v2 create_cell --name cell2 \ --transport-url rabbit://$rabbit_user:$rabbit_passwd@$node2_ip:5672/nova_cell1 \ --database_connection mysql+pymysql://$db_user:$db_passwd@$node2_ip/nova_cell1?charset=utf8 nova-manage cell_v2 discover_hosts
then you can see the new cell and host are added in the database:
mysql -u$user -p$password -Dnova -e 'select cell_id, host from host_mappings' +---------+-----------+ | cell_id | host | +---------+-----------+ | 2 | zhiyuan-1 | | 3 | zhiyuan-2 | +---------+-----------+ mysql -u$user -p$password -Dnova -e 'select id, name from cell_mappings' +----+-------+ | id | name | +----+-------+ | 1 | cell0 | | 2 | cell1 | | 3 | cell2 | +----+-------+
5 In node1, check if compute services in both hosts are registered:
openstack --os-region-name CentralRegion compute service list +----+------------------+-----------+----------+---------+-------+----------------------------+ | ID | Binary | Host | Zone | Status | State | Updated At | +----+------------------+-----------+----------+---------+-------+----------------------------+ | 5 | nova-scheduler | zhiyuan-1 | internal | enabled | up | 2017-09-20T06:56:02.000000 | | 6 | nova-conductor | zhiyuan-1 | internal | enabled | up | 2017-09-20T06:56:09.000000 | | 8 | nova-consoleauth | zhiyuan-1 | internal | enabled | up | 2017-09-20T06:56:01.000000 | | 1 | nova-conductor | zhiyuan-1 | internal | enabled | up | 2017-09-20T06:56:07.000000 | | 3 | nova-compute | zhiyuan-1 | nova | enabled | up | 2017-09-20T06:56:10.000000 | | 1 | nova-conductor | zhiyuan-2 | internal | enabled | up | 2017-09-20T06:56:07.000000 | | 3 | nova-compute | zhiyuan-2 | nova | enabled | up | 2017-09-20T06:56:09.000000 | +----+------------------+-----------+----------+---------+-------+----------------------------+ zhiyuan-1 has two nova-conductor services, because one of them is a super conductor service.
6 Create two aggregates and put the two hosts in each aggregate:
nova --os-region-name CentralRegion aggregate-create ag1 az1 nova --os-region-name CentralRegion aggregate-create ag2 az2 nova --os-region-name CentralRegion aggregate-add-host ag1 zhiyuan-1 nova --os-region-name CentralRegion aggregate-add-host ag2 zhiyuan-2
7 Create pods, tricircle client is used:
openstack --os-region-name CentralRegion multiregion networking pod create --region-name CentralRegion openstack --os-region-name CentralRegion multiregion networking pod create --region-name RegionOne --availability-zone az1 openstack --os-region-name CentralRegion multiregion networking pod create --region-name RegionTwo --availability-zone az2
8 Create network and boot virtual machines:
net_id=$(openstack --os-region-name CentralRegion network create --provider-network-type vxlan net1 -c id -f value) openstack --os-region-name CentralRegion subnet create --subnet-range 10.0.1.0/24 --network net1 subnet1 image_id=$(openstack --os-region-name CentralRegion image list -c ID -f value) openstack --os-region-name CentralRegion server create --flavor 1 --image $image_id --nic net-id=$net_id --availability-zone az1 vm1 openstack --os-region-name CentralRegion server create --flavor 1 --image $image_id --nic net-id=$net_id --availability-zone az2 vm2
Trouble Shooting¶
1 After you run “compute service list” in step5, you only see services in node1, like:
+----+------------------+-----------+----------+---------+-------+----------------------------+ | ID | Binary | Host | Zone | Status | State | Updated At | +----+------------------+-----------+----------+---------+-------+----------------------------+ | 5 | nova-scheduler | zhiyuan-1 | internal | enabled | up | 2017-09-20T06:55:52.000000 | | 6 | nova-conductor | zhiyuan-1 | internal | enabled | up | 2017-09-20T06:55:59.000000 | | 8 | nova-consoleauth | zhiyuan-1 | internal | enabled | up | 2017-09-20T06:56:01.000000 | | 1 | nova-conductor | zhiyuan-1 | internal | enabled | up | 2017-09-20T06:55:57.000000 | | 3 | nova-compute | zhiyuan-1 | nova | enabled | up | 2017-09-20T06:56:00.000000 | +----+------------------+-----------+----------+---------+-------+----------------------------+
Though new cell has been registered in the database, the running n-api process in node1 may not recognize it. We find that restarting n-api can solve this problem.
Installation guide for LBaaS in Tricircle¶
Note
Since Octavia does not support multiple region scenarios, some modifications are required to install the Tricircle and Octavia in multiple pods. As a result, we will keep updating this document, so as to support automatic installation and test for Tricircle and Octavia in multiple regions.
Setup & Installation¶
- 1 For the node1 in RegionOne, clone the code from Octavia repository to /opt/stack/. Then comment three lines, i.e., build_mgmt_network, create_mgmt_network_interface, and configure_lb_mgmt_sec_grp in the octavia_start function in octavia/devstack/plugin.sh, so that we can build the management network in multiple regions manually.
- 2 Follow “Multi-pod Installation with DevStack” document Multi-pod Installation with DevStack to prepare your local.conf for the node1 in RegionOne, and add the following lines before installation. Start DevStack in node1.
enable_plugin neutron-lbaas https://github.com/openstack/neutron-lbaas.git
enable_plugin octavia https://github.com/openstack/octavia.git
ENABLED_SERVICES+=,q-lbaasv2
ENABLED_SERVICES+=,octavia,o-cw,o-hk,o-hm,o-api
- 3 If users only want to deploy Octavia in RegionOne, the following two
steps can be skipped. After the installation in node1 is complete. For
the node2 in RegionTwo, clone the code from Octavia repository to
/opt/stack/. Here we need to modify plugin.sh in five sub-steps.
- First, since Keystone is installed in RegionOne and shared by other regions, we need to comment the function of creating Octavia roles, i.e., add_load-balancer_roles.
- Second, the same as Step 1, comment three lines of creating networking resources, i.e., build_mgmt_network, create_mgmt_network_interface, and configure_lb_mgmt_sec_grp in the octavia_start function in octavia/devstack/plugin.sh.
- Third, replace ‘openstack keypair’ with ‘openstack –os-region-name=$REGION_NAME keypair’.
- Fourth, replace ‘openstack image’ with ‘openstack –os-region-name=$REGION_NAME image’.
- Fifth, replace ‘openstack flavor’ with ‘openstack –os-region-name=$REGION_NAME flavor’.
- 4 Follow “Multi-pod Installation with DevStack” document Multi-pod Installation with DevStack to prepare your local.conf for the node2 in RegionTwo, and add the following lines before installation. Start DevStack in node2.
enable_plugin neutron-lbaas https://github.com/openstack/neutron-lbaas.git
enable_plugin octavia https://github.com/openstack/octavia.git
ENABLED_SERVICES+=,q-lbaasv2
ENABLED_SERVICES+=,octavia,o-cw,o-hk,o-hm,o-api
Prerequisite¶
- 1 After DevStack successfully starts, we must create environment variables for the admin user and use the admin project, since Octavia controller will use admin account to query and use the management network as well as security group created in the following steps
$ source openrc admin admin
- 2 Then unset the region name environment variable, so that the command can be issued to specified region in following commands as needed.
$ unset OS_REGION_NAME
- 3 Before configure LBaaS, we need to create pods in CentralRegion, i.e., node1.
$ openstack multiregion networking pod create --region-name CentralRegion
$ openstack multiregion networking pod create --region-name RegionOne --availability-zone az1
$ openstack multiregion networking pod create --region-name RegionTwo --availability-zone az2
Configuration¶
- 1 Create security groups.
Create security group and rules for load balancer management network.
$ openstack --os-region-name=CentralRegion security group create lb-mgmt-sec-grp
$ openstack --os-region-name=CentralRegion security group rule create --protocol icmp lb-mgmt-sec-grp
$ openstack --os-region-name=CentralRegion security group rule create --protocol tcp --dst-port 22 lb-mgmt-sec-grp
$ openstack --os-region-name=CentralRegion security group rule create --protocol tcp --dst-port 9443 lb-mgmt-sec-grp
$ openstack --os-region-name=CentralRegion security group rule create --protocol icmpv6 --ethertype IPv6 --remote-ip ::/0 lb-mgmt-sec-grp
$ openstack --os-region-name=CentralRegion security group rule create --protocol tcp --dst-port 22 --ethertype IPv6 --remote-ip ::/0 lb-mgmt-sec-grp
$ openstack --os-region-name=CentralRegion security group rule create --protocol tcp --dst-port 9443 --ethertype IPv6 --remote-ip ::/0 lb-mgmt-sec-grp
Note
The output in the console is omitted.
Create security group and rules for healthy manager
$ openstack --os-region-name=CentralRegion security group create lb-health-mgr-sec-grp
$ openstack --os-region-name=CentralRegion security group rule create --protocol udp --dst-port 5555 lb-health-mgr-sec-grp
$ openstack --os-region-name=CentralRegion security group rule create --protocol udp --dst-port 5555 --ethertype IPv6 --remote-ip ::/0 lb-health-mgr-sec-grp
Note
The output in the console is omitted.
- 2 Configure LBaaS in node1
Create an amphora management network in CentralRegion
$ neutron --os-region-name=CentralRegion net-create lb-mgmt-net1
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | |
| id | f8aa5dde-92f8-4c0c-81a7-54e6b3202d8e |
| name | lb-mgmt-net1 |
| project_id | a9541f8689054dc681e0234fa4315950 |
| provider:network_type | vxlan |
| provider:physical_network | |
| provider:segmentation_id | 1018 |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
+---------------------------+--------------------------------------+
Create a subnet in lb-mgmt-net1
$ neutron --os-region-name=CentralRegion subnet-create --name lb-mgmt-subnet1 lb-mgmt-net1 192.168.1.0/24
+-------------------+--------------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------------+
| allocation_pools | {"start": "192.168.1.2", "end": "192.168.1.254"} |
| cidr | 192.168.1.0/24 |
| created_at | 2017-09-18T11:49:25Z |
| description | |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | 192.168.1.1 |
| host_routes | |
| id | f04bad05-c610-490a-b9f7-12c0590e788c |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | lb-mgmt-subnet1 |
| network_id | f8aa5dde-92f8-4c0c-81a7-54e6b3202d8e |
| project_id | a9541f8689054dc681e0234fa4315950 |
| revision_number | 0 |
| subnetpool_id | |
| tags | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
| updated_at | 2017-09-18T11:49:25Z |
+-------------------+--------------------------------------------------+
Create the health management interface for Octavia in RegionOne.
$ id_and_mac=$(neutron --os-region-name=CentralRegion port-create --name octavia-health-manager-region-one-listen-port --security-group lb-health-mgr-sec-grp --device-owner Octavia:health-mgr --binding:host_id=$(hostname) lb-mgmt-net1 $PORT_FIXED_IP | awk '/ id | mac_address / {print $4}')
$ id_and_mac=($id_and_mac)
$ MGMT_PORT_ID=${id_and_mac[0]}
$ MGMT_PORT_MAC=${id_and_mac[1]}
$ MGMT_PORT_IP=$(openstack --os-region-name=RegionOne port show -f value -c fixed_ips $MGMT_PORT_ID | awk '{FS=",| "; gsub(",",""); gsub("'\''",""); for(i = 1; i <= NF; ++i) {if ($i ~ /^ip_address/) {n=index($i, "="); if (substr($i, n+1) ~ "\\.") print substr($i, n+1)}}}')
$ neutron --os-region-name=RegionOne port-update --binding:host_id=$(hostname) $MGMT_PORT_ID
$ sudo ovs-vsctl -- --may-exist add-port ${OVS_BRIDGE:-br-int} o-hm0 -- set Interface o-hm0 type=internal -- set Interface o-hm0 external-ids:iface-status=active -- set Interface o-hm0 external-ids:attached-mac=$MGMT_PORT_MAC -- set Interface o-hm0 external-ids:iface-id=$MGMT_PORT_ID -- set Interface o-hm0 external-ids:skip_cleanup=true
$ OCTAVIA_DHCLIENT_CONF=/etc/octavia/dhcp/dhclient.conf
$ sudo ip link set dev o-hm0 address $MGMT_PORT_MAC
$ sudo dhclient -v o-hm0 -cf $OCTAVIA_DHCLIENT_CONF
Listening on LPF/o-hm0/fa:16:3e:ea:1a:c9
Sending on LPF/o-hm0/fa:16:3e:ea:1a:c9
Sending on Socket/fallback
DHCPDISCOVER on o-hm0 to 255.255.255.255 port 67 interval 3 (xid=0xae9d2b51)
DHCPREQUEST of 192.168.1.5 on o-hm0 to 255.255.255.255 port 67 (xid=0x512b9dae)
DHCPOFFER of 192.168.1.5 from 192.168.1.2
DHCPACK of 192.168.1.5 from 192.168.1.2
bound to 192.168.1.5 -- renewal in 38734 seconds.
$ sudo iptables -I INPUT -i o-hm0 -p udp --dport 5555 -j ACCEPT
Note
As shown in the console, DHCP server allocates 192.168.1.5 as the IP of the health management interface, i.e., 0-hm. Hence, we need to modify the /etc/octavia/octavia.conf file to make Octavia aware of it and use the resources we just created, including health management interface, amphora security group and so on.
| Option | Description | Example |
|---|---|---|
| [health_manager] bind_ip | the ip of health manager in RegionOne | 192.168.1.5 |
| [health_manager] bind_port | the port health manager listens on | 5555 |
| [health_manager] controller_ip_port_list | the ip and port of health manager binds in RegionOne | 192.168.1.5:5555 |
| [controller_worker] amp_boot_network_list | the id of amphora management network in RegionOne | query neutron to obtain it, i.e., the id of lb-mgmt-net1 in this doc |
| [controller_worker] amp_secgroup_list | the id of security group created for amphora in central region | query neutron to obtain it, i.e., the id of lb-mgmt-sec-grp |
| [neutron] service_name | The name of the neutron service in the keystone catalog | neutron |
| [neutron] endpoint | Central neutron endpoint if override is necessary | http://192.168.56.5:20001/ |
| [neutron] region_name | Region in Identity service catalog to use for communication with the OpenStack services | CentralRegion |
| [neutron] endpoint_type | Endpoint type | public |
| [nova] service_name | The name of the nova service in the keystone catalog | nova |
| [nova] endpoint | Custom nova endpoint if override is necessary | http://192.168.56.5/compute/v2.1 |
| [nova] region_name | Region in Identity service catalog to use for communication with the OpenStack services | RegionOne |
| [nova] endpoint_type | Endpoint type in Identity service catalog to use for communication with the OpenStack services | public |
| [glance] service_name | The name of the glance service in the keystone catalog | glance |
| [glance] endpoint | Custom glance endpoint if override is necessary | http://192.168.56.5/image |
| [glance] region_name | Region in Identity service catalog to use for communication with the OpenStack services | RegionOne |
| [glance] endpoint_type | Endpoint type in Identity service catalog to use for communication with the OpenStack services | public |
Restart all the services of Octavia in node1.
$ sudo systemctl restart devstack@o-*
- 2 If users only deploy Octavia in RegionOne, this step can be skipped. Configure LBaaS in node2.
Create an amphora management network in CentralRegion
$ neutron --os-region-name=CentralRegion net-create lb-mgmt-net2
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | |
| id | 6b2859b7-2b24-4e7c-a340-2e638de9b452 |
| name | lb-mgmt-net2 |
| project_id | a9541f8689054dc681e0234fa4315950 |
| provider:network_type | vxlan |
| provider:physical_network | |
| provider:segmentation_id | 1054 |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
+---------------------------+--------------------------------------+
Create a subnet in lb-mgmt-net2
$ neutron --os-region-name=CentralRegion subnet-create --name lb-mgmt-subnet2 lb-mgmt-net2 192.168.2.0/24
+-------------------+--------------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------------+
| allocation_pools | {"start": "192.168.2.2", "end": "192.168.2.254"} |
| cidr | 192.168.2.0/24 |
| created_at | 2017-09-18T11:55:38Z |
| description | |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | 192.168.2.1 |
| host_routes | |
| id | e92408d7-6110-4da4-b073-2b1a23b866a1 |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | lb-mgmt-subnet2 |
| network_id | 6b2859b7-2b24-4e7c-a340-2e638de9b452 |
| project_id | a9541f8689054dc681e0234fa4315950 |
| revision_number | 0 |
| subnetpool_id | |
| tags | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
| updated_at | 2017-09-18T11:55:38Z |
+-------------------+--------------------------------------------------+
Create the health management interface for Octavia in RegionTwo.
$ id_and_mac=$(neutron --os-region-name=CentralRegion port-create --name octavia-health-manager-region-one-listen-port --security-group lb-health-mgr-sec-grp --device-owner Octavia:health-mgr --binding:host_id=$(hostname) lb-mgmt-net2 $PORT_FIXED_IP | awk '/ id | mac_address / {print $4}')
$ id_and_mac=($id_and_mac)
$ MGMT_PORT_ID=${id_and_mac[0]}
$ MGMT_PORT_MAC=${id_and_mac[1]}
$ MGMT_PORT_IP=$(openstack --os-region-name=RegionTwo port show -f value -c fixed_ips $MGMT_PORT_ID | awk '{FS=",| "; gsub(",",""); gsub("'\''",""); for(i = 1; i <= NF; ++i) {if ($i ~ /^ip_address/) {n=index($i, "="); if (substr($i, n+1) ~ "\\.") print substr($i, n+1)}}}')
$ neutron --os-region-name=RegionTwo port-update --binding:host_id=$(hostname) $MGMT_PORT_ID
$ sudo ovs-vsctl -- --may-exist add-port ${OVS_BRIDGE:-br-int} o-hm0 -- set Interface o-hm0 type=internal -- set Interface o-hm0 external-ids:iface-status=active -- set Interface o-hm0 external-ids:attached-mac=$MGMT_PORT_MAC -- set Interface o-hm0 external-ids:iface-id=$MGMT_PORT_ID -- set Interface o-hm0 external-ids:skip_cleanup=true
$ OCTAVIA_DHCLIENT_CONF=/etc/octavia/dhcp/dhclient.conf
$ sudo ip link set dev o-hm0 address $MGMT_PORT_MAC
$ sudo dhclient -v o-hm0 -cf $OCTAVIA_DHCLIENT_CONF
Listening on LPF/o-hm0/fa:16:3e:c3:7c:2b
Sending on LPF/o-hm0/fa:16:3e:c3:7c:2b
Sending on Socket/fallback
DHCPDISCOVER on o-hm0 to 255.255.255.255 port 67 interval 3 (xid=0xc75c651f)
DHCPREQUEST of 192.168.2.11 on o-hm0 to 255.255.255.255 port 67 (xid=0x1f655cc7)
DHCPOFFER of 192.168.2.11 from 192.168.2.2
DHCPACK of 192.168.2.11 from 192.168.2.2
bound to 192.168.2.11 -- renewal in 35398 seconds.
$ sudo iptables -I INPUT -i o-hm0 -p udp --dport 5555 -j ACCEPT
Note
The ip allocated by DHCP server, i.e., 192.168.2.11 in this case, is the bound and listened by health manager of Octavia. Please note that it will be used in the configuration file of Octavia.
Modify the /etc/octavia/octavia.conf in node2.
| Option | Description | Example |
|---|---|---|
| [health_manager] bind_ip | the ip of health manager in RegionTwo | 192.168.2.11 |
| [health_manager] bind_port | the port health manager listens on in RegionTwo | 5555 |
| [health_manager] controller_ip_port_list | the ip and port of health manager binds in RegionTwo | 192.168.2.11:5555 |
| [controller_worker] amp_boot_network_list | the id of amphora management network in RegionTwo | query neutron to obtain it, i.e., the id of lb-mgmt-net2 in this doc |
| [controller_worker] amp_secgroup_list | the id of security group created for amphora in central region | query neutron to obtain it, i.e., the id of lb-mgmt-sec-grp |
| [neutron] service_name | The name of the neutron service in the keystone catalog | neutron |
| [neutron] endpoint | Central neutron endpoint if override is necessary | http://192.168.56.6:20001/ |
| [neutron] region_name | Region in Identity service catalog to use for communication with the OpenStack services | CentralRegion |
| [neutron] endpoint_type | Endpoint type | public |
| [nova] service_name | The name of the nova service in the keystone catalog | nova |
| [nova] endpoint | Custom nova endpoint if override is necessary | http://192.168.56.6/compute/v2.1 |
| [nova] region_name | Region in Identity service catalog to use for communication with the OpenStack services | RegionTwo |
| [nova] endpoint_type | Endpoint type in Identity service catalog to use for communication with the OpenStack services | public |
| [glance] service_name | The name of the glance service in the keystone catalog | glance |
| [glance] endpoint | Custom glance endpoint if override is necessary | http://192.168.56.6/image |
| [glance] region_name | Region in Identity service catalog to use for communication with the OpenStack services | RegionTwo |
| [glance] endpoint_type | Endpoint type in Identity service catalog to use for communication with the OpenStack services | public |
Restart all the services of Octavia in node2.
$ sudo systemctl restart devstack@o-*
By now, we finish installing LBaaS.
How to play¶
- 1 LBaaS members in one network and in same region
Here we take VxLAN as an example.
Create net1 in CentralRegion
$ neutron --os-region-name=CentralRegion net-create net1
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | |
| id | ff495200-dd0e-4fd5-8d5f-e750d6da2beb |
| name | net1 |
| project_id | a9541f8689054dc681e0234fa4315950 |
| provider:network_type | vxlan |
| provider:physical_network | |
| provider:segmentation_id | 1096 |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
+---------------------------+--------------------------------------+
Create a subnet in net1
$ neutron --os-region-name=CentralRegion subnet-create net1 10.0.1.0/24 --name subnet1 --no-gateway
+-------------------+--------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------+
| allocation_pools | {"start": "10.0.1.2", "end": "10.0.1.254"} |
| cidr | 10.0.1.0/24 |
| created_at | 2017-09-18T12:11:03Z |
| description | |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | |
| host_routes | |
| id | 86587e20-dfb4-4192-a59a-d523d2c5f932 |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | subnet1 |
| network_id | ff495200-dd0e-4fd5-8d5f-e750d6da2beb |
| project_id | a9541f8689054dc681e0234fa4315950 |
| revision_number | 0 |
| subnetpool_id | |
| tags | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
| updated_at | 2017-09-18T12:11:03Z |
+-------------------+--------------------------------------------+
Note
To enable adding instances as members with VIP, amphora adds a new route table to route the traffic sent from VIP to its gateway. However, in Tricircle, the gateway obtained from central neutron is not the real gateway in local neutron. As a result, we did not set any gateway for the subnet temporarily. We will remove the limitation in the future.
List all available flavors in RegionOne
$ nova --os-region-name=RegionOne flavor-list
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
| 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
| 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
| 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
| 42 | m1.nano | 64 | 0 | 0 | | 1 | 1.0 | True |
| 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
| 84 | m1.micro | 128 | 0 | 0 | | 1 | 1.0 | True |
| c1 | cirros256 | 256 | 0 | 0 | | 1 | 1.0 | True |
| d1 | ds512M | 512 | 5 | 0 | | 1 | 1.0 | True |
| d2 | ds1G | 1024 | 10 | 0 | | 1 | 1.0 | True |
| d3 | ds2G | 2048 | 10 | 0 | | 2 | 1.0 | True |
| d4 | ds4G | 4096 | 20 | 0 | | 4 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
List all available images in RegionOne
$ glance --os-region-name=RegionOne image-list
+--------------------------------------+--------------------------+
| ID | Name |
+--------------------------------------+--------------------------+
| 1b2a0cba-4801-4096-934c-2ccd0940d35c | amphora-x64-haproxy |
| 05ba1898-32ad-4418-a51c-c0ded215e221 | cirros-0.3.5-x86_64-disk |
+--------------------------------------+--------------------------+
Create two instances, i.e., backend1 and backend2, in RegionOne, which reside in subnet1.
$ nova --os-region-name=RegionOne boot --flavor 1 --image $image_id --nic net-id=$net1_id backend1
$ nova --os-region-name=RegionOne boot --flavor 1 --image $image_id --nic net-id=$net1_id backend2
+--------------------------------------+-----------------------------------------------------------------+
| Property | Value |
+--------------------------------------+-----------------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | |
| OS-EXT-SRV-ATTR:host | - |
| OS-EXT-SRV-ATTR:hostname | backend1 |
| OS-EXT-SRV-ATTR:hypervisor_hostname | - |
| OS-EXT-SRV-ATTR:instance_name | |
| OS-EXT-SRV-ATTR:kernel_id | |
| OS-EXT-SRV-ATTR:launch_index | 0 |
| OS-EXT-SRV-ATTR:ramdisk_id | |
| OS-EXT-SRV-ATTR:reservation_id | r-0xj1w004 |
| OS-EXT-SRV-ATTR:root_device_name | - |
| OS-EXT-SRV-ATTR:user_data | - |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | 3EzRqv8dBWY7 |
| config_drive | |
| created | 2017-09-18T12:28:10Z |
| description | - |
| flavor:disk | 1 |
| flavor:ephemeral | 0 |
| flavor:extra_specs | {} |
| flavor:original_name | m1.tiny |
| flavor:ram | 512 |
| flavor:swap | 0 |
| flavor:vcpus | 1 |
| hostId | |
| host_status | |
| id | 9e13d9d1-393d-401d-a3a8-c76fb8171bcd |
| image | cirros-0.3.5-x86_64-disk (05ba1898-32ad-4418-a51c-c0ded215e221) |
| key_name | - |
| locked | False |
| metadata | {} |
| name | backend1 |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tags | [] |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
| updated | 2017-09-18T12:28:24Z |
| user_id | eab4a9d4da144e43bb1cacc8fad6f057 |
+--------------------------------------+-----------------------------------------------------------------+
Console in the instances with user ‘cirros’ and password of ‘cubswin:)’. Then run the following commands to simulate a web server.
$ MYIP=$(ifconfig eth0| grep 'inet addr'| awk -F: '{print $2}'| awk '{print $1}')
$ while true; do echo -e "HTTP/1.0 200 OK\r\n\r\nWelcome to $MYIP" | sudo nc -l -p 80 ; done&
The Octavia installed in node1 and node2 are two standalone services, here we take RegionOne as an example.
Create a load balancer for subnet1 in RegionOne.
$ neutron --os-region-name=RegionOne lbaas-loadbalancer-create --name lb1 subnet1
+---------------------+--------------------------------------+
| Field | Value |
+---------------------+--------------------------------------+
| admin_state_up | True |
| description | |
| id | bfdf4dc6-8e1f-43fe-b83d-5fd26878826f |
| listeners | |
| name | lb1 |
| operating_status | OFFLINE |
| pools | |
| provider | octavia |
| provisioning_status | PENDING_CREATE |
| tenant_id | 460439b4f4d846a4b505139f347a2358 |
| vip_address | 10.0.1.10 |
| vip_port_id | a0a98ec1-d4dc-42a3-bedd-de2fb571b9e7 |
| vip_subnet_id | 14b6ac12-d4d1-4b16-b40b-ae50d365e8e0 |
+---------------------+--------------------------------------+
Create a listener for the load balancer after the status of the load balancer is ‘ACTIVE’. Please note that it may take some time for the load balancer to become ‘ACTIVE’.
$ neutron --os-region-name=RegionOne lbaas-loadbalancer-list
+--------------------------------------+------+----------------------------------+-------------+---------------------+----------+
| id | name | tenant_id | vip_address | provisioning_status | provider |
+--------------------------------------+------+----------------------------------+-------------+---------------------+----------+
| bfdf4dc6-8e1f-43fe-b83d-5fd26878826f | lb1 | a9541f8689054dc681e0234fa4315950 | 10.0.1.10 | ACTIVE | octavia |
+--------------------------------------+------+----------------------------------+-------------+---------------------+----------+
$ neutron --os-region-name=RegionOne lbaas-listener-create --loadbalancer lb1 --protocol HTTP --protocol-port 80 --name listener1
+---------------------------+------------------------------------------------+
| Field | Value |
+---------------------------+------------------------------------------------+
| admin_state_up | True |
| connection_limit | -1 |
| default_pool_id | |
| default_tls_container_ref | |
| description | |
| id | ad090bb1-ef9d-430b-a6e3-07c5d279b4a5 |
| loadbalancers | {"id": "bfdf4dc6-8e1f-43fe-b83d-5fd26878826f"} |
| name | listener1 |
| protocol | HTTP |
| protocol_port | 80 |
| sni_container_refs | |
| tenant_id | 460439b4f4d846a4b505139f347a2358 |
+---------------------------+------------------------------------------------+
Create a pool for the listener after the status of the load balancer is ‘ACTIVE’.
$ neutron --os-region-name=RegionOne lbaas-pool-create --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP --name pool1
+---------------------+------------------------------------------------+
| Field | Value |
+---------------------+------------------------------------------------+
| admin_state_up | True |
| description | |
| healthmonitor_id | |
| id | 710b321d-d829-4d9b-8f63-1f295a6fb922 |
| lb_algorithm | ROUND_ROBIN |
| listeners | {"id": "ad090bb1-ef9d-430b-a6e3-07c5d279b4a5"} |
| loadbalancers | {"id": "bfdf4dc6-8e1f-43fe-b83d-5fd26878826f"} |
| members | |
| name | pool1 |
| protocol | HTTP |
| session_persistence | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
+---------------------+------------------------------------------------+
Add two instances to the pool as members, after the status of the load balancer is ‘ACTIVE’.
$ neutron --os-region-name=RegionOne lbaas-member-create --subnet $subnet1_id --address $backend1_ip --protocol-port 80 pool1
+----------------+--------------------------------------+
| Field | Value |
+----------------+--------------------------------------+
| address | 10.0.1.6 |
| admin_state_up | True |
| id | d882e60a-f093-435b-bed1-c81a57862144 |
| name | |
| protocol_port | 80 |
| subnet_id | 86587e20-dfb4-4192-a59a-d523d2c5f932 |
| tenant_id | 460439b4f4d846a4b505139f347a2358 |
| weight | 1 |
+----------------+--------------------------------------+
$ neutron --os-region-name=RegionOne lbaas-member-create --subnet $subnet1_id --address $backend2_ip --protocol-port 80 pool1
+----------------+--------------------------------------+
| Field | Value |
+----------------+--------------------------------------+
| address | 10.0.1.7 |
| admin_state_up | True |
| id | 12914f63-604f-43ed-be1c-76d35bbb2af7 |
| name | |
| protocol_port | 80 |
| subnet_id | 86587e20-dfb4-4192-a59a-d523d2c5f932 |
| tenant_id | 460439b4f4d846a4b505139f347a2358 |
| weight | 1 |
+----------------+--------------------------------------+
Verify load balancing. Request the VIP twice.
$ sudo ip netns exec dhcp-$net1_id curl -v $VIP
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.1.6
* Closing connection 0
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.1.7
* Closing connection 0
- 2 LBaaS members in one network but in different regions
List all available flavors in RegionTwo
$ nova --os-region-name=RegionTwo flavor-list
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
| 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
| 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
| 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
| 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
| c1 | cirros256 | 256 | 0 | 0 | | 1 | 1.0 | True |
| d1 | ds512M | 512 | 5 | 0 | | 1 | 1.0 | True |
| d2 | ds1G | 1024 | 10 | 0 | | 1 | 1.0 | True |
| d3 | ds2G | 2048 | 10 | 0 | | 2 | 1.0 | True |
| d4 | ds4G | 4096 | 20 | 0 | | 4 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
List all available images in RegionTwo
$ glance --os-region-name=RegionTwo image-list
+--------------------------------------+--------------------------+
| ID | Name |
+--------------------------------------+--------------------------+
| 488f77c4-5986-494e-958a-1007761339a4 | amphora-x64-haproxy |
| 211fc21c-aa07-4afe-b8a7-d82ce0e5f7b7 | cirros-0.3.5-x86_64-disk |
+--------------------------------------+--------------------------+
Create an instance in RegionTwo, which resides in subnet1
$ nova --os-region-name=RegionTwo boot --flavor 1 --image $image_id --nic net-id=$net1_id backend3
+--------------------------------------+-----------------------------------------------------------------+
| Property | Value |
+--------------------------------------+-----------------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | |
| OS-EXT-SRV-ATTR:host | - |
| OS-EXT-SRV-ATTR:hostname | backend3 |
| OS-EXT-SRV-ATTR:hypervisor_hostname | - |
| OS-EXT-SRV-ATTR:instance_name | |
| OS-EXT-SRV-ATTR:kernel_id | |
| OS-EXT-SRV-ATTR:launch_index | 0 |
| OS-EXT-SRV-ATTR:ramdisk_id | |
| OS-EXT-SRV-ATTR:reservation_id | r-hct8v7fz |
| OS-EXT-SRV-ATTR:root_device_name | - |
| OS-EXT-SRV-ATTR:user_data | - |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | hL5rLbGGUZ2C |
| config_drive | |
| created | 2017-09-18T12:46:07Z |
| description | - |
| flavor:disk | 1 |
| flavor:ephemeral | 0 |
| flavor:extra_specs | {} |
| flavor:original_name | m1.tiny |
| flavor:ram | 512 |
| flavor:swap | 0 |
| flavor:vcpus | 1 |
| hostId | |
| host_status | |
| id | 00428610-db5e-478f-88f0-ae29cc2e6898 |
| image | cirros-0.3.5-x86_64-disk (211fc21c-aa07-4afe-b8a7-d82ce0e5f7b7) |
| key_name | - |
| locked | False |
| metadata | {} |
| name | backend3 |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tags | [] |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
| updated | 2017-09-18T12:46:12Z |
| user_id | eab4a9d4da144e43bb1cacc8fad6f057 |
+--------------------------------------+-----------------------------------------------------------------+
Console in the instances with user ‘cirros’ and password of ‘cubswin:)’. Then run the following commands to simulate a web server.
$ MYIP=$(ifconfig eth0| grep 'inet addr'| awk -F: '{print $2}'| awk '{print $1}')
$ while true; do echo -e "HTTP/1.0 200 OK\r\n\r\nWelcome to $MYIP" | sudo nc -l -p 80 ; done&
Add backend3 to the pool as a member, after the status of the load balancer is ‘ACTIVE’.
$ neutron --os-region-name=RegionOne lbaas-member-create --subnet $subnet1_id --address $backend3_ip --protocol-port 80 pool1
Verify load balancing. Request the VIP three times.
Note
Please note if the subnet is created in the region, just like the cases before this step, either unique name or id of the subnet can be used as hint. But if the subnet is not created yet, like the case for backend3, users are required to use subnet id as hint instead of subnet name. Because the subnet is not created in RegionOne, local neutron needs to query central neutron for the subnet with id.
$ sudo ip netns exec dhcp- curl -v $VIP
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.1.6
* Closing connection 0
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.1.7
* Closing connection 0
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.1.14
* Closing connection 0
- 3 LBaaS across members in different networks and different regions
Create net2 in CentralRegion
$ neutron --os-region-name=CentralRegion net-create net2
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | |
| id | d1664cb9-daf2-49f8-91a9-4fa9701a5845 |
| name | net2 |
| project_id | a9541f8689054dc681e0234fa4315950 |
| provider:network_type | vxlan |
| provider:physical_network | |
| provider:segmentation_id | 1033 |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
+---------------------------+--------------------------------------+
Create a subnet in net2
$ neutron --os-region-name=CentralRegion subnet-create net2 10.0.2.0/24 --name subnet2 --no-gateway
+-------------------+--------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------+
| allocation_pools | {"start": "10.0.2.2", "end": "10.0.2.254"} |
| cidr | 10.0.2.0/24 |
| created_at | 2017-09-18T12:14:39Z |
| description | |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | |
| host_routes | |
| id | cc1a74fd-5a41-4b30-9b6c-e241e8d912ef |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | subnet2 |
| network_id | d1664cb9-daf2-49f8-91a9-4fa9701a5845 |
| project_id | a9541f8689054dc681e0234fa4315950 |
| revision_number | 0 |
| subnetpool_id | |
| tags | |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
| updated_at | 2017-09-18T12:14:39Z |
+-------------------+--------------------------------------------+
List all available flavors in RegionTwo
$ nova --os-region-name=RegionTwo flavor-list
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
| 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
| 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
| 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
| 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
| c1 | cirros256 | 256 | 0 | 0 | | 1 | 1.0 | True |
| d1 | ds512M | 512 | 5 | 0 | | 1 | 1.0 | True |
| d2 | ds1G | 1024 | 10 | 0 | | 1 | 1.0 | True |
| d3 | ds2G | 2048 | 10 | 0 | | 2 | 1.0 | True |
| d4 | ds4G | 4096 | 20 | 0 | | 4 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
List all available images in RegionTwo
$ glance --os-region-name=RegionTwo image-list
+--------------------------------------+--------------------------+
| ID | Name |
+--------------------------------------+--------------------------+
| 488f77c4-5986-494e-958a-1007761339a4 | amphora-x64-haproxy |
| 211fc21c-aa07-4afe-b8a7-d82ce0e5f7b7 | cirros-0.3.5-x86_64-disk |
+--------------------------------------+--------------------------+
Create an instance in RegionTwo, which resides in subnet2
$ nova --os-region-name=RegionTwo boot --flavor 1 --image $image_id --nic net-id=$net2_id backend4
+--------------------------------------+-----------------------------------------------------------------+
| Property | Value |
+--------------------------------------+-----------------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | |
| OS-EXT-SRV-ATTR:host | - |
| OS-EXT-SRV-ATTR:hostname | backend4 |
| OS-EXT-SRV-ATTR:hypervisor_hostname | - |
| OS-EXT-SRV-ATTR:instance_name | |
| OS-EXT-SRV-ATTR:kernel_id | |
| OS-EXT-SRV-ATTR:launch_index | 0 |
| OS-EXT-SRV-ATTR:ramdisk_id | |
| OS-EXT-SRV-ATTR:reservation_id | r-rrdab98o |
| OS-EXT-SRV-ATTR:root_device_name | - |
| OS-EXT-SRV-ATTR:user_data | - |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | iPGJ7eeSAfhf |
| config_drive | |
| created | 2017-09-22T12:48:35Z |
| description | - |
| flavor:disk | 1 |
| flavor:ephemeral | 0 |
| flavor:extra_specs | {} |
| flavor:original_name | m1.tiny |
| flavor:ram | 512 |
| flavor:swap | 0 |
| flavor:vcpus | 1 |
| hostId | |
| host_status | |
| id | fd7d8ba5-fb37-44db-808e-6760a0683b2f |
| image | cirros-0.3.5-x86_64-disk (211fc21c-aa07-4afe-b8a7-d82ce0e5f7b7) |
| key_name | - |
| locked | False |
| metadata | {} |
| name | backend4 |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tags | [] |
| tenant_id | a9541f8689054dc681e0234fa4315950 |
| updated | 2017-09-22T12:48:41Z |
| user_id | eab4a9d4da144e43bb1cacc8fad6f057 |
+--------------------------------------+-----------------------------------------------------------------+
Console in the instances with user ‘cirros’ and password of ‘cubswin:)’. Then run the following commands to simulate a web server.
$ MYIP=$(ifconfig eth0| grep 'inet addr'| awk -F: '{print $2}'| awk '{print $1}')
$ while true; do echo -e "HTTP/1.0 200 OK\r\n\r\nWelcome to $MYIP" | sudo nc -l -p 80 ; done&
Add the instance to the pool as a member, after the status of the load balancer is ‘ACTIVE’.
$ neutron --os-region-name=RegionOne lbaas-member-create --subnet $subnet2_id --address $backend4_ip --protocol-port 80 pool1
Verify load balancing. Request the VIP four times.
$ sudo ip netns exec dhcp- curl -v $VIP
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.1.6
* Closing connection 0
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.1.7
* Closing connection 0
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.1.14
* Closing connection 0
* Rebuilt URL to: 10.0.1.10/
* Trying 10.0.1.10...
* Connected to 10.0.1.10 (10.0.1.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 10.0.1.10
> User-Agent: curl/7.47.0
> Accept: */*
>
* HTTP 1.0, assume close after body
< HTTP/1.0 200 OK
<
Welcome to 10.0.2.4
* Closing connection 0
Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.