Warning
The present document has been deprecated and this guide should be followed instead. However, parent port and tag information from a logical switch port can still be retrieved following the example shown in this guide below.
Container Integration with OVN¶
OVN supports virtual networking for both VMs and containers. There are two modes OVN can operate in with respect to containers. The first mode looks just like it does with VMs. If you’re running a bunch of containers in a cluster of VMs, OVN can be used to provide a virtual networking overlay for those containers to use.
The second mode is very interesting in the context of OpenStack. OVN makes special accommodation for running containers inside of VMs when the networking for those VMs is already being managed by OVN. You can create a special type of port in OVN for these containers and have them directly connected to virtual networks managed by OVN. There are two major benefits of this:
- It allows containers to use virtual networks without creating another layer of overlay networks. This reduces networking complexity and increases performance.
- It allows arbitrary connections between any VMs and any containers running inside VMs.
Creating a Container Port¶
A container port has two additional attributes that do not exist with a normal Neutron port. First, you must specify the parent port that the VM is using. Second, you must specify a tag. This tag is a VLAN ID today, though that may change in the future. Traffic from the container must be tagged with this VLAN ID by open vSwitch running inside the VM. Traffic destined for the container will arrive on the parent VM port with this VLAN ID. Open vSwitch inside the VM will forward this traffic to the container.
These two attributes are not currently supported in the Neutron API. As a result, we are initially allowing these attributes to be set in the ‘binding:profile’ extension for ports. If this approach gains traction and more general support, we will revisit making this a real extension to the Neutron API.
Note that the default /etc/neutron/policy.json does not allow a regular user to set a ‘binding:profile’. If you want to allow this, you must update policy.json. To do so, change:
"create_port:binding:profile": "rule:admin_only",
to:
"create_port:binding:profile": "",
Here is an example of creating a port for a VM, and then creating a port for a container that runs inside of that VM:
$ neutron port-create private
Created a new port:
+-----------------------+---------------------------------------------------------------------------------+
| Field | Value |
+-----------------------+---------------------------------------------------------------------------------+
| admin_state_up | True |
| allowed_address_pairs | |
| binding:vnic_type | normal |
| device_id | |
| device_owner | |
| fixed_ips | {"subnet_id": "ce5e0d61-10a1-44be-b917-f628616d686a", "ip_address": "10.0.0.3"} |
| id | 74e43404-f3c2-4f13-aeec-934db4e2de35 |
| mac_address | fa:16:3e:c5:a9:74 |
| name | |
| network_id | f654265f-baa6-4351-9d76-b5693521c521 |
| security_groups | fe25592f-3610-48b9-a114-4ec834c52349 |
| status | DOWN |
| tenant_id | db75dd6671ef4858a7fed450f1f8e995 |
+-----------------------+---------------------------------------------------------------------------------+
$ neutron port-create --binding-profile '{"parent_name":"74e43404-f3c2-4f13-aeec-934db4e2de35","tag":42}' private
Created a new port:
+-----------------------+---------------------------------------------------------------------------------+
| Field | Value |
+-----------------------+---------------------------------------------------------------------------------+
| admin_state_up | True |
| allowed_address_pairs | |
| binding:vnic_type | normal |
| device_id | |
| device_owner | |
| fixed_ips | {"subnet_id": "ce5e0d61-10a1-44be-b917-f628616d686a", "ip_address": "10.0.0.4"} |
| id | be155d07-ecd9-4ad7-91e5-5be60684572a |
| mac_address | fa:16:3e:74:ef:82 |
| name | |
| network_id | f654265f-baa6-4351-9d76-b5693521c521 |
| security_groups | fe25592f-3610-48b9-a114-4ec834c52349 |
| status | DOWN |
| tenant_id | db75dd6671ef4858a7fed450f1f8e995 |
+-----------------------+---------------------------------------------------------------------------------+
Now we can look at the corresponding logical switch ports in OVN to see that the parent and tag were set as expected:
$ ovn-nbctl lsp-get-parent be155d07-ecd9-4ad7-91e5-5be60684572a
74e43404-f3c2-4f13-aeec-934db4e2de35
$ ovn-nbctl lsp-get-tag be155d07-ecd9-4ad7-91e5-5be60684572a
42
Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.