# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
import os
import stat
from cryptography import fernet
from oslo_config import cfg
from oslo_log import log
from keystone.i18n import _LE, _LW, _LI
LOG = log.getLogger(__name__)
CONF = cfg.CONF
[docs]def validate_key_repository(requires_write=False):
"""Validate permissions on the key repository directory."""
# NOTE(lbragstad): We shouldn't need to check if the directory was passed
# in as None because we don't set allow_no_values to True.
# ensure current user has sufficient access to the key repository
is_valid = (os.access(CONF.fernet_tokens.key_repository, os.R_OK) and
os.access(CONF.fernet_tokens.key_repository, os.X_OK))
if requires_write:
is_valid = (is_valid and
os.access(CONF.fernet_tokens.key_repository, os.W_OK))
if not is_valid:
LOG.error(
_LE('Either [fernet_tokens] key_repository does not exist or '
'Keystone does not have sufficient permission to access it: '
'%s'), CONF.fernet_tokens.key_repository)
else:
# ensure the key repository isn't world-readable
stat_info = os.stat(CONF.fernet_tokens.key_repository)
if(stat_info.st_mode & stat.S_IROTH or
stat_info.st_mode & stat.S_IXOTH):
LOG.warning(_LW(
'[fernet_tokens] key_repository is world readable: %s'),
CONF.fernet_tokens.key_repository)
return is_valid
def _convert_to_integers(id_value):
"""Cast user and group system identifiers to integers."""
# NOTE(lbragstad) os.chown() will raise a TypeError here if
# keystone_user_id and keystone_group_id are not integers. Let's
# cast them to integers if we can because it's possible to pass non-integer
# values into the fernet_setup utility.
try:
id_int = int(id_value)
except ValueError as e:
msg = _LE('Unable to convert Keystone user or group ID. Error: %s')
LOG.error(msg, e)
raise
return id_int
[docs]def create_key_directory(keystone_user_id=None, keystone_group_id=None):
"""If the configured key directory does not exist, attempt to create it."""
if not os.access(CONF.fernet_tokens.key_repository, os.F_OK):
LOG.info(_LI(
'[fernet_tokens] key_repository does not appear to exist; '
'attempting to create it'))
try:
os.makedirs(CONF.fernet_tokens.key_repository, 0o700)
except OSError:
LOG.error(_LE(
'Failed to create [fernet_tokens] key_repository: either it '
'already exists or you don\'t have sufficient permissions to '
'create it'))
if keystone_user_id and keystone_group_id:
os.chown(
CONF.fernet_tokens.key_repository,
keystone_user_id,
keystone_group_id)
elif keystone_user_id or keystone_group_id:
LOG.warning(_LW(
'Unable to change the ownership of [fernet_tokens] '
'key_repository without a keystone user ID and keystone group '
'ID both being provided: %s') %
CONF.fernet_tokens.key_repository)
def _create_new_key(keystone_user_id, keystone_group_id):
"""Securely create a new encryption key.
Create a new key that is readable by the Keystone group and Keystone user.
"""
key = fernet.Fernet.generate_key() # key is bytes
# This ensures the key created is not world-readable
old_umask = os.umask(0o177)
if keystone_user_id and keystone_group_id:
old_egid = os.getegid()
old_euid = os.geteuid()
os.setegid(keystone_group_id)
os.seteuid(keystone_user_id)
elif keystone_user_id or keystone_group_id:
LOG.warning(_LW(
'Unable to change the ownership of the new key without a keystone '
'user ID and keystone group ID both being provided: %s') %
CONF.fernet_tokens.key_repository)
# Determine the file name of the new key
key_file = os.path.join(CONF.fernet_tokens.key_repository, '0')
try:
with open(key_file, 'w') as f:
f.write(key.decode('utf-8')) # convert key to str for the file.
finally:
# After writing the key, set the umask back to it's original value. Do
# the same with group and user identifiers if a Keystone group or user
# was supplied.
os.umask(old_umask)
if keystone_user_id and keystone_group_id:
os.seteuid(old_euid)
os.setegid(old_egid)
LOG.info(_LI('Created a new key: %s'), key_file)
[docs]def initialize_key_repository(keystone_user_id=None, keystone_group_id=None):
"""Create a key repository and bootstrap it with a key.
:param keystone_user_id: User ID of the Keystone user.
:param keystone_group_id: Group ID of the Keystone user.
"""
# make sure we have work to do before proceeding
if os.access(os.path.join(CONF.fernet_tokens.key_repository, '0'),
os.F_OK):
LOG.info(_LI('Key repository is already initialized; aborting.'))
return
# bootstrap an existing key
_create_new_key(keystone_user_id, keystone_group_id)
# ensure that we end up with a primary and secondary key
rotate_keys(keystone_user_id, keystone_group_id)
[docs]def rotate_keys(keystone_user_id=None, keystone_group_id=None):
"""Create a new primary key and revoke excess active keys.
:param keystone_user_id: User ID of the Keystone user.
:param keystone_group_id: Group ID of the Keystone user.
Key rotation utilizes the following behaviors:
- The highest key number is used as the primary key (used for encryption).
- All keys can be used for decryption.
- New keys are always created as key "0," which serves as a placeholder
before promoting it to be the primary key.
This strategy allows you to safely perform rotation on one node in a
cluster, before syncing the results of the rotation to all other nodes
(during both key rotation and synchronization, all nodes must recognize all
primary keys).
"""
# read the list of key files
key_files = dict()
for filename in os.listdir(CONF.fernet_tokens.key_repository):
path = os.path.join(CONF.fernet_tokens.key_repository, str(filename))
if os.path.isfile(path):
try:
key_id = int(filename)
except ValueError: # nosec : name isn't a number, ignore the file.
pass
else:
key_files[key_id] = path
LOG.info(_LI('Starting key rotation with %(count)s key files: %(list)s'), {
'count': len(key_files),
'list': list(key_files.values())})
# determine the number of the new primary key
current_primary_key = max(key_files.keys())
LOG.info(_LI('Current primary key is: %s'), current_primary_key)
new_primary_key = current_primary_key + 1
LOG.info(_LI('Next primary key will be: %s'), new_primary_key)
# promote the next primary key to be the primary
os.rename(
os.path.join(CONF.fernet_tokens.key_repository, '0'),
os.path.join(CONF.fernet_tokens.key_repository, str(new_primary_key)))
key_files.pop(0)
key_files[new_primary_key] = os.path.join(
CONF.fernet_tokens.key_repository,
str(new_primary_key))
LOG.info(_LI('Promoted key 0 to be the primary: %s'), new_primary_key)
# add a new key to the rotation, which will be the *next* primary
_create_new_key(keystone_user_id, keystone_group_id)
max_active_keys = CONF.fernet_tokens.max_active_keys
# check for bad configuration
if max_active_keys < 1:
LOG.warning(_LW(
'[fernet_tokens] max_active_keys must be at least 1 to maintain a '
'primary key.'))
max_active_keys = 1
# purge excess keys
# Note that key_files doesn't contain the new active key that was created,
# only the old active keys.
keys = sorted(key_files.keys(), reverse=True)
while len(keys) > (max_active_keys - 1):
index_to_purge = keys.pop()
key_to_purge = key_files[index_to_purge]
LOG.info(_LI('Excess key to purge: %s'), key_to_purge)
os.remove(key_to_purge)
[docs]def load_keys():
"""Load keys from disk into a list.
The first key in the list is the primary key used for encryption. All
other keys are active secondary keys that can be used for decrypting
tokens.
"""
if not validate_key_repository():
return []
# build a dictionary of key_number:encryption_key pairs
keys = dict()
for filename in os.listdir(CONF.fernet_tokens.key_repository):
path = os.path.join(CONF.fernet_tokens.key_repository, str(filename))
if os.path.isfile(path):
with open(path, 'r') as key_file:
try:
key_id = int(filename)
except ValueError: # nosec : filename isn't a number, ignore
# this file since it's not a key.
pass
else:
keys[key_id] = key_file.read()
if len(keys) != CONF.fernet_tokens.max_active_keys:
# If there haven't been enough key rotations to reach max_active_keys,
# or if the configured value of max_active_keys has changed since the
# last rotation, then reporting the discrepancy might be useful. Once
# the number of keys matches max_active_keys, this log entry is too
# repetitive to be useful.
LOG.info(_LI(
'Loaded %(count)d encryption keys (max_active_keys=%(max)d) from: '
'%(dir)s'), {
'count': len(keys),
'max': CONF.fernet_tokens.max_active_keys,
'dir': CONF.fernet_tokens.key_repository})
# return the encryption_keys, sorted by key number, descending
return [keys[x] for x in sorted(keys.keys(), reverse=True)]